A plain two-car Everett garage with a cracked slab went from consult to finished Smoke flake polyurea floor in six days, installed in one.
Plenty of garages look like this one. A standard two-car layout in Everett, taped drywall that never got painted, a water heater and furnace at the back, and a plain grey slab with a crack running across it. Nothing was wrong with it, exactly. It just looked unfinished, and bare concrete soaks up every drip and stain.
The homeowner wanted a clean, easy floor without a long project. From the first visit to the finished garage floor coating in Everett took six days. The floor itself, Certified Penntek polyurea in Smoke flake, went down in one day in September 2024.
Nicole came out on September 6, 2024. The consultation covered the basics we check on every slab:
The schedule happened to line up, and the crew was back on September 12. Every job's timing depends on the calendar, but a fast turnaround is often possible when the slab is ready.
The crew showed up with the grinder, dust extractor and flake buckets and worked through the garage in one day:
By the end of the day the crack and stains were covered, and the floor ran up to the stem walls and around the water heater stand. Our post on the Penntek installation process explains each step.
Smoke Evolution mixes black, charcoal, grey and white chips into a medium grey. In a garage with beige walls and plain drywall, it adds contrast and makes the space look intentional. It's one of the most forgiving colors we install. Tire marks, dust and wet footprints all disappear into the pattern.
A lot of people with a garage like this think about rolling on a DIY kit. That's a fair weekend project, but those coatings sit on top of unground concrete and often lift under hot tires or peel within a few years.
The Penntek system is different from the ground up. Diamond grinding opens the concrete. The basecoat forms a chemical bond at over 1,300 PSI. Before the coating comes up, the concrete will come up. And the polyaspartic topcoat resists hot tire pickup and stays non-porous, so oil and road grime wipe off. Our post on DIY vs. professional installs lays it out.
See the bond and flexibility tested in the Penntek Stretch Test. The floor carries a limited lifetime warranty backed by Penntek.
From October to spring, Everett cars come home wet. Rain and road film drip off onto the slab every night. Bare concrete absorbs it and starts to stain. A sealed polyurea floor keeps it on the surface, where a squeegee or mop takes care of it.
Learn more about our Everett epoxy garage floor alternative, or see another Everett garage finished in Tidal Wave with cabinets and hex lights.
It depends on the schedule and the slab. This Everett garage was installed six days after the first visit. Nicole will give you real dates at the consult.
Yes. Cracks are cleaned out during grinding and filled with Penntek Mender crack repair before the basecoat goes down. The flexible basecoat then moves with the slab.
Yes. A plain garage benefits the most. It goes from bare, stain-prone concrete to a sealed, easy-clean floor in one day, without changing anything else in the room.
Want your garage done before the rain sets in? Book a free in-home quote or call 425-226-6085.
Here's just a few of our previous projects.
