Certified Penntek polyurea gives your Edmonds garage the longest-lasting, lowest lifetime cost floor, finished in one day and covered by a limited lifetime warranty from Penntek.
We provide concrete coatings, garage floor coatings & epoxy concrete flooring throughout Woodinville WA, Seattle & the Puget Sound
Concrete Floors & Garage Floor Epoxy / Polyurea / Polyaspartic
Residential & Commercial
Get the Longest-Lifespan & Lowest Cost of Ownership from a Certified Penntek Polyurea Floor
Woodinville WA Concrete Coatings & Epoxy Polyurea Garage Floor Coatings
Most garage floors start yellowing, chipping and peeling within a few years. Cascade installs Certified Penntek polyurea for Edmonds homeowners in one day, with a lifetime manufacturer warranty, so you get a floor that cleans up easily and never needs redoing.
Hillside homes above the Sound, older slabs and wet winters leave concrete with rust rings, oil and hairline cracks. A peeling coat only adds to the mess, and redoing it costs twice.
Experience the difference of a truly superior concrete coating.
We understand the frustration of a coating that lifted by year 3–5. As a Certified Penntek Dealer we meter and scratch test every floor, and six garages in town already show it.
Searching for Epoxy Floor Contractors? Learn how our Polyurea Floor Coatings lead to a longer lifespan & dramatically better durability.
Three proof points behind an epoxy poly concrete coating done the Penntek way, each one tested by the manufacturer.
FadeLock™ UV stability survived a 16-hour QUV test, so the floor by your garage door stays the color you picked.
The polyaspartic topcoat resists hot tire pickup, the problem that pulls soft epoxy up where you park.
A limited lifetime warranty backed by Penntek, a company with dealers in 200 markets, not just by the crew who installed it.
Looking for an epoxy floor contractor near Woodinville WA? Cascade Coatings would be honored to connect and share how a Certified Penntek Polyurea Floor leads to the longest lasting, most durable, and aesthetically pleasing epoxy floor solution.
Our floors won't delaminate, yellow, blister or chip.
Our superior process & product leads to tremendously longer lifespans.
Confidently utilize your space without the risk of chips, peeling or low-durability.
Our systems are harder, less porous and remain pristine for years longer.
Choosing a cheap floor leads to short lifespans.
Your garage may hold two cars, a furnace on a stand, a wall of storage and a slab with rust rings and oil spots. Or it may have an old coating that has gone yellow and started to lift. Both are common in Edmonds, and both can be fixed in a day.
Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, about 11 miles from Edmonds. Owners Nicole Schuler and Sheldon Groh lead each consult and install.
Plain truth: we built this page so people searching "epoxy garage floor Edmonds" or "concrete coatings near me" in south Snohomish County would find us. Everything below comes from six real garages in town, with the readings we took.
We have already removed one failed floor here: a long single-bay garage with a yellow coating peeling off in sheets. That failure follows a familiar script. The slab got a light etch instead of a grind, so the coating only held mechanically. Typical epoxy is brittle and not UV stable, so it cracked over joints and yellowed near the light. With no moisture test, damp from below finished the job. Problems like that tend to show in years 3–5.
Edmonds adds its own twists. Many homes sit on hillsides with water moving downslope, plenty of slabs date back decades, and our readings here have run from 3.2% to 4.6%. None of that rules out a floor. It just means testing first.
You searched for epoxy, so let us explain the swap. Around here it often goes by epoxy poly, because the application looks like an epoxy floor. What sets it apart is a set of four things: Penntek's proprietary polyurea blend, prep done by highly trained Certified Penntek installers, a manufacturer-backed warranty and a floor that outperforms on every test below. A Penntek floor starts with diamond grinding and Penntek Mender in every crack. The pure polyurea basecoat, over 99% solids, forms a chemical bond with over 1,300 PSI of strength using a silane adhesion promoter, and it stays flexible. The non-porous polyaspartic topcoat carries FadeLock™ UV stability. See the bond and fade tests on the Penntek demo page, and read why garage coatings peel around Seattle.
The peeling yellow coating was scratch tested, ground off and replaced with Mount Everest flake in October 2024, drain and side room included.
A three-bay garage of 819 sq ft went to Smoke flake on January 5, 2026. Its card logs 4.5% moisture and a 50°F slab, and a long crack was repaired first.
A 484 sq ft garage with a center steel post, oil stains and a crack got Tidal Wave in October 2024. Another, packed with storage under plastic sheeting, read 4.2% and got Mount Everest flake without being emptied. We also finished Domino flake around a water heater stand and Slate Stone in a busy family garage.
A fast, low-priced coating can look fine on day one. By year four you may be emptying the garage again, paying to remove the failed layer and buying the floor you meant to get. If the installer has closed up, the warranty closes with them. Ours is a limited lifetime warranty backed by Penntek, founded in 2010 in Lakeville, Minnesota.
Muddy shoes and drips from the car mop up in a minute. The color you chose stays that color. A 30–40 year floor means this is the last time you think about it. We also coat garages in Lynnwood, Shoreline and Mill Creek. Planning a larger home project too? The City of Edmonds handles permits.
A typical epoxy garage floor often starts failing in years 3–5. A Penntek polyurea floor is designed for 30–40 years, up to five times longer, with a limited lifetime warranty backed by the manufacturer.
The floor has to be clear on install day, but wall storage can often stay covered. One Edmonds garage kept its shelving in place under plastic sheeting while we coated the floor.
Yes, by removing it. A peeling coating has lost its grip, so we grind it off and bond the new floor to sound concrete, as we did on the yellow Edmonds coating in 2024.
It can. Our 819 sq ft Smoke floor went in on January 5, 2026, with slab moisture and temperature recorded on the warranty card that day.
Concrete coating price depends on size, crack repair, old coating removal and whether the slab needs a moisture barrier. The free in-home visit gives you a written quote based on your actual floor.
Ready for concrete coating or epoxy in Edmonds? Book a free in-home quote or call 425-226-6085, and browse our customer reviews. If you got here searching for Edmonds epoxy floors, thanks for giving the long version a read.
Photos & Portfolio
