Certified Penntek dealer / Woodinville, WAServing Seattle & the EastsideLimited lifetime warranty
Cascade Concrete Coatings
425-226-6085Get a free quote
Lynnwood Epoxy Poly Coated Garage Floors

Lynnwood Concrete Coating and Epoxy-Style Floors, Built for Older Slabs

Old patches, tired control joints and decades of wet commutes. We repair your concrete, test it and coat it with Certified Penntek polyurea that is made to stay put.

✓Certified Penntek dealer✓Limited lifetime warranty✓Most garages done in one day
Lynnwood garage floors

Most Lynnwood homeowners want a garage floor that still looks new in twenty years. Finding one is hard, because a lot of epoxy installers rush the prep and roll on a coating that's built to be redone.

Don't get stuck redoing your floor every few years. We'll test your Lynnwood slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.

The short answer

Cascade Concrete Coatings, a Certified Penntek Dealer based about 8 miles away in Woodinville, installs epoxy-style garage floor coatings in Lynnwood. The crew tests moisture and hardness, grinds out old patches and coatings, repairs cracks and installs pure polyurea with flake and a polyaspartic topcoat. Local work includes a garage with built-in cabinets and a swim school, all backed by a limited lifetime warranty from Penntek.

Real floors in and around LynnwoodSee all Lynnwood projects →
4finished floors in and around Lynnwood
Up to 5xthe lifespan of typical epoxy
30 to 40year floor, built to bond with your slab
1 dayinstall for a typical garage
What older slabs carry

Your Lynnwood Slab Has Decades of Stories in It

A lot of Lynnwood homes went up in the 1960s and 70s, before vapor barriers under slabs were standard. Those garages have seen fifty-odd winters. You can usually read the history on the floor: a patch where someone fixed a control joint years ago, hairline cracks branching off it, oil shadows under the old parking spot and a dull gray surface that never looks clean.

Old patches are the sneaky part. They often crack out again along the same line, and a thin coating rolled over them telegraphs every flaw. Add moisture pushing up from below and grime tracked in off I-5 and I-405, and an ordinary epoxy floor has very little chance.

You do not need a new slab. You need the old one prepared properly, with every weak spot found and repaired before anything goes on top. Grinding opens the surface so the basecoat can bond into clean concrete, and crack repair keeps old lines from showing through the flake.

What we deliver

We'll turn your Lynnwood garage into a floor you only buy once.

Every Lynnwood job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.

Before and after

Same slab. Same angle. Night and day.

Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.

↔BeforeAfter
Commercial floor · Everett, WASolid Dark Grey Service Shop Floor in Everett1 of 12
Certified Penntek vs. typical epoxy or poly

Lynnwood garage floors fail six ways. We beat all six.

The coating is only half of it. Watch the same slab go through what a Lynnwood garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.

The right system for your concrete

Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.

Moisture & hardness tested
Typical epoxy or cheap polySame slab
✕Moisture pushes up from the slab. Blisters and peeling follow.
Certified Penntek by CascadeSame slab
✓Tested first. A moisture barrier goes down when the slab needs one.
Score after round 1Certified Penntek 1, typical epoxy or poly 0
The Penntek advantage

Not all coatings are equal. Watch.

Side-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.

Stain testOil, brake fluid and road grime wipe right off the non-porous Penntek topcoat, where typical epoxy can absorb stains.
Stretch testPenntek’s flexible basecoat stretches with the concrete. Brittle epoxy cracks and lets go.
Hammer testDropped tools are part of garage life. Typical coatings chip. Penntek resists chips and dents.
Watch the full side-by-side tests →

Settling for a quick epoxy job can leave your Lynnwood garage peeling by year five.

A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.

✕Peeling where your tires sitSome installers skip diamond grinding, so the coating never truly grips your slab. Hot tires can lift it right off.
✕Yellowing by the garage doorMany epoxies amber in sunlight, so the first few feet of your floor turn a different color than the rest.
✕Cracks showing throughSome crews coat right over cracks. Every bit of slab movement shows up in your floor within a season or two.
✕Moisture blistersPuget Sound slabs hold moisture. Skip the testing and water vapor can push the coating up in bubbles.
✕Paying for it twiceTypical epoxy problems often show in years 3 to 5. Every redo means emptying your Lynnwood garage and starting over.

We know your garage is more than a place to park. It's part of your home.

For a lot of Lynnwood families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.

Nicole and Sheldon, owners of Cascade Concrete Coatings
The after

Picture pulling into a Lynnwood garage you're proud of.

Here's what a Certified Penntek floor from our team gives you, long after install day.

✓Clean up in secondsThe non-porous topcoat shrugs off oil, salt and road grime, so a quick wipe keeps your garage looking finished.
✓Color that stays trueFadeLock UV stability keeps the floor by the open door matching the back wall, year after year.
✓A floor that moves with your slabThe flexible basecoat handles Northwest temperature swings and settling, so your Lynnwood floor doesn't crack with the concrete.
✓Your garage back in a dayA typical garage is finished in one day. Before we leave, the crew gives you clear walk-on and parking times.
✓Coverage that outlasts any one shopYour limited lifetime warranty is backed by Penntek, the manufacturer, so it isn’t tied to one small company.
✓A garage that adds to your homeA finished, showroom-clean floor makes a strong first impression for guests, and for buyers when it’s time to sell.
Performance at every layer

Typical epoxy is one coat. Ours is a system.

Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.

01020304

When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.

Epoxy compared

Same Install Steps as Epoxy. A Very Different Floor Under Your Car.

Typical epoxy is brittle, so it splits over cracks. It grips the surface mechanically, so moisture and hot tires lift it. It is not UV stable, so it ambers near the door. On a 1970s slab with an old patch, that is three strikes before you park.

Penntek is different because four things come together on every job:

  • A proprietary pure polyurea blend, over 99% solids, that a silane adhesion promoter helps lock onto your slab with a 1,300+ PSI chemical bond.
  • Prep by highly trained certified installers, who diamond grind, fill every crack with Penntek Mender and meter moisture before the basecoat.
  • A limited lifetime warranty backed by Penntek, a manufacturer with dealers in 200+ markets.
  • A better product, finished with a non-porous polyaspartic topcoat that resists hot tire pickup, oil, salt and chemicals, and FadeLock™ UV stability proven in a 16-hour QUV test.

Put together, that is up to 5x the lifespan of typical epoxy and a 30 to 40 year floor. See the bond and flex tests on our demo page, or read why garage coatings peel in our climate.

01 / 04The polyurea itselfPenntek's proprietary pure polyurea blend is over 99% solids and exclusive to certified dealers. It bonds chemically to old and new concrete alike.
02 / 04The people doing prepHighly trained certified installers diamond grind, repair old patches and cracks with Penntek Mender and test moisture. On older slabs like these, prep is most of the job.
03 / 04The warranty behind itA limited lifetime warranty backed by Penntek, the manufacturer, registered on a Penntek job card at install. It does not depend on one crew staying in business.
04 / 04The floor you live withA non-porous polyaspartic topcoat resists hot tires, oil and road salt, and FadeLock™ holds color. Up to 5x the lifespan of typical epoxy, for a 30 to 40 year floor.
Watch the side-by-side tests →How the Penntek warranty works →
Not your typical epoxy crew

Professionally trained installers

Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Certified Penntek Dealer

What "Certified Penntek Dealer" actually means

  1. 01Vetted before trainingPenntek reviews every company first. Many never make it to training.
  2. 02Hands-on training at PenntekChemistry, slab analysis, prep, application and troubleshooting, taught by Penntek’s technical team.
  3. 03Exclusive formulasPenntek’s proprietary polyurea is sold only to certified dealers. You can’t buy it at a store.
  4. 04Backed on every jobPenntek’s technical support team backs our crew from prep to finish, and Penntek backs your floor’s limited lifetime warranty.
What we coat in Lynnwood

Any concrete, inside or out.

Garages are most of what we do in Lynnwood, but the same Penntek system protects patios, pool decks, basements and commercial floors.

Garage floorsEpoxy poly garage floors for Lynnwood homes, from one-car to four-car.Patios & walkwaysWeather-ready, slip-resistant coatings for outdoor concrete.Pool decksA good-looking, durable finish around the water.BasementsMoisture-tested coatings for finished and unfinished basements.Commercial floorsShops, showrooms and clinics in and around Lynnwood.
Three steps

Here Is How Your Lynnwood Floor Happens

A short visit, a clear number and one day of work for most garages. You never have to clear the whole garage for the quote, and we will tell you exactly what needs to move before install day. The step-by-step install process shows each stage with photos.

  1. 01We read your slabYour free in-home quote covers moisture readings, a hardness scratch test, a close look at old patches and joints, measurements and a written number.
  2. 02Prep and install in a dayDiamond grind, Mender in every crack, a moisture barrier if the slab needs it, then basecoat, flake and topcoat. Most garages finish in one day.
  3. 03Pull in and forget about itThe crew gives you walk-on and parking times before they leave. Then rain, grime and drips wipe off for decades.
Your guide

Meet the Crew That Reads Your Concrete Before Quoting It

We are Cascade Concrete Coatings, a Certified Penntek Dealer based in Woodinville, about 8 miles from Lynnwood. Our owners lead every consult and every install, and both of them spend the first part of each visit looking at the floor, not talking.

That means a moisture meter reading, a scratch test for hardness and a close look at every old patch and joint. On one local garage, an old control-joint repair got as much attention as the rest of the slab combined, because that is where trouble usually starts.

If you searched for epoxy, you are in the right place. Our floor is Certified Penntek polyurea, and many people simply call it an epoxy polyurea garage floor because it goes in much the same way.

See the full install process →
Is it right for you?

Is a Penntek floor right for your Lynnwood home?

You're probably a great fit if any of these sound familiar.

Color choices

Warm or Cool? Match Your Floor to What's Already There

Floors here so far lean two ways. One owner went warm with Fieldstone to pick up the cream of their built-in cabinets. Nearby, Tidal Wave and Mount Everest lead with two jobs each, and Slate Stone and Smoke show up too.

Look at what is already in your garage: cabinets, wall color, the door. Then hold the samples next to it. We bring boards to the consult for exactly that, and the full lineup is on our styles and colors page.

FieldstoneEnviroflakeWarm stone tones that pick up cream or wood cabinets. Fieldstone turned an older garage with built-ins into one finished room.Tidal WaveEvolution FlakeBlue-gray, white and black flake that hides grit from a rainy commute. Tidal Wave covered a deep tandem garage and an Edmonds two-car next door.Mount EverestEvolution FlakeWhite and light gray flake that brightens a garage with small windows. It replaced a yellowed, peeling coating just over in Edmonds.Slate StoneEvolution FlakeMid gray, tan and black with a natural stone look. A forgiving choice for a busy family garage full of bikes and sports gear.
See every color and system →
Lynnwood and next door

From a Built-In Garage to a Swim School, Your Local Proof

Our work in town so far covers two very different floors: an older home garage with a full wall of built-ins, and a commercial swim school where the floor is wet from opening to close. Both are Certified Penntek polyurea.

Right next door, the same crew has coated a deep tandem garage in Mountlake Terrace and several Edmonds garages, including one where a yellowed, peeling coating was ground off and replaced with Mount Everest in October 2024. All of it lives on our project portfolio.

Reviews

Hear it from your neighbors.

All reviews →
Loading Google reviews…
Free in-home quote in Lynnwood

Get the Lynnwood garage floor everyone wishes they had.

An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.

Book my free quote425-226-6085
Around Lynnwood

Alderwood to Meadowdale, Your Corner of Lynnwood Is on Our Map

Lynnwood is busier than it used to be, with the light rail station at City Center and new apartments rising near Alderwood mall. Off the main roads, though, it is still a city of single-family neighborhoods with original garages. In Alderwood Manor, around Scriber Lake and up toward Meadowdale and Martha Lake, we find split-levels and ramblers with one or two-car garages, built-in shelving and slabs that have been patched more than once.

Businesses here face a different test. Foot traffic, rain on every shoe and the need to keep the doors open during work. The swim school we coated was phased around its build-out for exactly that reason. Our post on commercial vs residential coatings covers the differences.

We also coat floors in the cities that ring Lynnwood: Edmonds toward the Sound, Shoreline to the south, Mill Creek to the northeast and Bothell to the east. For permits on a garage remodel, check with the City of Lynnwood. The Lynnwood page on Wikipedia covers how the city grew from Alderwood Manor.

Nearby we also serve
EdmondsShorelineMill CreekBothellLake Forest Park
Why do it right

Settle for a Quick Job and You'll Empty the Garage Twice

A crew that etches instead of grinding and skips the moisture meter can make a floor look great by evening. The trouble shows later, usually right over that old patch or where the tires turn. Then it is a weekend of moving bikes, bins and tools onto the driveway, hoping the rain holds, paying to grind off the failure and paying for a second floor. If the warranty only belonged to that crew, it may be gone too.

Compare that to pulling in after a rainy commute and wiping the drips away in seconds. Sweep once and the floor looks new. Ten, twenty, thirty years on, the patch line is still invisible. Our cleaning and care guide shows how little upkeep it takes.

Lynnwood questions

What Lynnwood homeowners ask us

Don't see yours? Call 425-226-6085 and an owner will answer it.

Who installs epoxy-style garage floors in Lynnwood?+
Cascade Concrete Coatings installs epoxy-style garage floors in Lynnwood as a Certified Penntek Dealer, based about 8 miles away in Woodinville. We have coated a Lynnwood garage and a local swim school, plus floors next door in Edmonds and Mountlake Terrace.
Can you coat over an old patch in my Lynnwood garage slab?+
We can coat over an old patch in a Lynnwood slab once it is properly repaired. We grind it, check whether it is cracking out again and fill any cracks with Penntek Mender. One local garage had an old control-joint patch that was repaired before Fieldstone went down.
Is my older Lynnwood slab too damp for a coating?+
An older Lynnwood slab is rarely too damp to coat, but we always measure. One local garage read 5.2% at the consult. When readings run high, we add a two-layer moisture barrier system before the basecoat.
How long does garage floor epoxy last in Lynnwood?+
Typical garage floor epoxy in Lynnwood often peels or yellows within a few years, sooner over damp slabs and old patches. A Penntek polyurea floor is built to last 30 to 40 years, up to 5x the lifespan of typical epoxy, with a limited lifetime warranty.
Is a polyurea concrete coating worth it over epoxy?+
A polyurea concrete coating is worth it for most homeowners because you buy it once. It bonds chemically at over 1,300 PSI, flexes with the slab and resists UV and hot tire pickup. Some people call it epoxy polyurea, but it is a Penntek polyurea system all the way through.
Do you coat commercial floors in Lynnwood?+
Yes, we coat commercial floors in Lynnwood. A local swim school got blue and gray flake polyurea in its lobby, hallways and changing areas, scheduled in phases around the build-out from late 2024 into spring 2025.
Which colors hide road grime in a Lynnwood garage?+
Mid-tone flake hides road grime in a Lynnwood garage well, because the mix of light and dark chips breaks up dirt the eye would otherwise catch. Tidal Wave, Slate Stone and Smoke keep commuter grit and wet tire marks from standing out. Warmer Fieldstone works when you want to match wood or cream cabinets.
Can you coat a Lynnwood garage in winter?+
Yes, we coat Lynnwood garages in winter. The Fieldstone garage in town was coated in January 2026. On install day the crew checks slab moisture and temperature and gives you walk-on and parking times before they leave.
What affects the cost of a garage floor coating?+
The cost of a garage floor coating depends on square footage, how many cracks and old patches need repair, moisture readings, old coating removal and extras like stem walls. The in-home quote is free and ends with a clear written number.
Will an EV or hot tires lift a Lynnwood garage floor?+
An EV or hot tires will not lift a Penntek garage floor in Lynnwood. The polyaspartic topcoat is non-porous and resists hot tire pickup, oil, salt and chemicals. It is a good surface for a charger, a workbench or a rolling tool chest.
How long does a Lynnwood install take?+
A typical Lynnwood garage takes one day. Larger jobs, damp slabs or commercial spaces scheduled in phases can take longer, and we tell you that at the quote. Before leaving, the crew tells you when to walk and park.
Does Cascade Concrete Coatings install epoxy garage floors in Lynnwood?+

Yes. We install epoxy poly garage floors across Lynnwood using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.

Do you coat patios, walkways and pool decks in Lynnwood?+

We do. The same Penntek system that protects garages works on outdoor concrete around Lynnwood, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.

Do you handle commercial concrete coatings in Lynnwood?+

Yes. We coat shops, showrooms, clinics and service bays in and around Lynnwood. See our commercial projects.

How do I get a quote for my Lynnwood garage floor?+

Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.

One more thing

Thanks for Finding Us, Lynnwood

Here is the honest version. We wrote this page so people in Lynnwood searching for epoxy garage floors and concrete coatings would find us. We kept it to real floors and real readings in and right around town, because that is what we would want to read.

If that was useful, the next step is easy. Book a free in-home quote or call 425-226-6085, and we will come read your slab.

Nicole and Sheldon, owners

Ready for Concrete Coating or Epoxy in Lynnwood?

Book your free in-home quote and we will read your slab, check every old patch and show you samples. Call 425-226-6085.

Get my free quote425-226-6085
All 30 cities we serveService area overview →
Ames LakeBellevueBothellCarnationDuvallEdmondsEverettIssaquahKenmoreKentKirklandLake Forest ParkLake StevensLynnwoodMarysvilleMedinaMercer IslandMill CreekMonroeMount VernonMukilteoNewcastleRedmondRentonSammamishSeattleShorelineSnohomishStanwoodWoodinville