Certified Penntek dealer / Woodinville, WAServing Seattle & the EastsideLimited lifetime warranty
Cascade Concrete Coatings
425-226-6085Get a free quote
Bellevue Epoxy Poly Coated Garage Floors & Concrete Coatings

Bellevue Concrete Coating for Garages That Match the House

Black cabinets, two EVs, a front entry that needs to match. Bellevue garages ask more of a floor. We test each slab, then install Certified Penntek polyurea, usually in one day.

✓Certified Penntek dealer✓Limited lifetime warranty✓Most garages done in one day
Bellevue garage floors

Most Bellevue homeowners want a garage floor that still looks new in twenty years. Finding one is hard, because a lot of epoxy installers rush the prep and roll on a coating that's built to be redone.

Don't get stuck redoing your floor every few years. We'll test your Bellevue slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.

The short answer

Cascade Concrete Coatings, a Certified Penntek Dealer, installs epoxy-style garage floor coatings in Bellevue using Penntek pure polyurea rather than epoxy. We meter moisture and test hardness at a free in-home quote, then grind, repair and coat a typical garage in one day. Floors carry a limited lifetime warranty backed by Penntek. Six Bellevue projects, from EV garages to an event space, are in our portfolio.

Real floors in and around BellevueSee all Bellevue projects →
6finished floors in and around Bellevue
Up to 5xthe lifespan of typical epoxy
30 to 40year floor, built to bond with your slab
1 dayinstall for a typical garage
Where it goes wrong

Your Garage Should Look as Good as Your Kitchen

A lot of garages around here have had real money put into them. Full walls of cabinets, slatwall, EV chargers, good lighting. Then the floor is still plain grey concrete with oil spots, rust marks and tire wear.

Some have it worse. We've walked into garages with floor paint wearing through to bare concrete and a covered front entry where red porch paint was flaking off in chips. Paint and thin coatings sit on top of the slab. Once water and hot tires get underneath, they let go.

Then there's the corner nobody looks at. One EV garage had white mineral deposits on the stem wall, the residue water leaves as it moves through concrete. That's the kind of thing that wrecks a cheap coating within a few winters.

What we deliver

We'll turn your Bellevue garage into a floor you only buy once.

Every Bellevue job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.

Bellevue before and after

Real Bellevue floors, before and after.

Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.

↔BeforeAfter
Certified Penntek vs. typical epoxy or poly

Bellevue garage floors fail six ways. We beat all six.

The coating is only half of it. Watch the same slab go through what a Bellevue garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.

The right system for your concrete

Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.

Moisture & hardness tested
Typical epoxy or cheap polySame slab
✕Moisture pushes up from the slab. Blisters and peeling follow.
Certified Penntek by CascadeSame slab
✓Tested first. A moisture barrier goes down when the slab needs one.
Score after round 1Certified Penntek 1, typical epoxy or poly 0
The Penntek advantage

Not all coatings are equal. Watch.

Side-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.

Stain testOil, brake fluid and road grime wipe right off the non-porous Penntek topcoat, where typical epoxy can absorb stains.
Stretch testPenntek’s flexible basecoat stretches with the concrete. Brittle epoxy cracks and lets go.
Hammer testDropped tools are part of garage life. Typical coatings chip. Penntek resists chips and dents.
Watch the full side-by-side tests →

Settling for a quick epoxy job can leave your Bellevue garage peeling by year five.

A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.

✕Peeling where your tires sitSome installers skip diamond grinding, so the coating never truly grips your slab. Hot tires can lift it right off.
✕Yellowing by the garage doorMany epoxies amber in sunlight, so the first few feet of your floor turn a different color than the rest.
✕Cracks showing throughSome crews coat right over cracks. Every bit of slab movement shows up in your floor within a season or two.
✕Moisture blistersPuget Sound slabs hold moisture. Skip the testing and water vapor can push the coating up in bubbles.
✕Paying for it twiceTypical epoxy problems often show in years 3 to 5. Every redo means emptying your Bellevue garage and starting over.

We know your garage is more than a place to park. It's part of your home.

For a lot of Bellevue families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.

Nicole and Sheldon, owners of Cascade Concrete Coatings
The after

Picture pulling into a Bellevue garage you're proud of.

Here's what a Certified Penntek floor from our team gives you, long after install day.

✓Clean up in secondsThe non-porous topcoat shrugs off oil, salt and road grime, so a quick wipe keeps your garage looking finished.
✓Color that stays trueFadeLock UV stability keeps the floor by the open door matching the back wall, year after year.
✓A floor that moves with your slabThe flexible basecoat handles Northwest temperature swings and settling, so your Bellevue floor doesn't crack with the concrete.
✓Your garage back in a dayA typical garage is finished in one day. Before we leave, the crew gives you clear walk-on and parking times.
✓Coverage that outlasts any one shopYour limited lifetime warranty is backed by Penntek, the manufacturer, so it isn’t tied to one small company.
✓A garage that adds to your homeA finished, showroom-clean floor makes a strong first impression for guests, and for buyers when it’s time to sell.
Performance at every layer

Typical epoxy is one coat. Ours is a system.

Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.

01020304

When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.

Under the flake

What Your Floor Gets That Epoxy Can't Give It

If you've been searching epoxy floors, you're in the right place. The flake finish you've seen in friends' garages is what we install. We just build it with something tougher than epoxy.

Typical epoxy is a rigid film. Bellevue garages see damp winters, cold snaps and sun through the door in summer, and the slab moves through all of it. Epoxy can't flex with that, so it cracks, peels at the tire lanes and yellows over time.

Penntek uses a proprietary pure polyurea blend, over 99% solids, chemically bonded at 1,300+ PSI to diamond-ground concrete. On top goes a polyaspartic topcoat that's non-porous and resists hot tire pickup, oil, salt and chemicals. FadeLock™ UV stability passed a 16-hour QUV test, so a light floor stays light.

That combination is why people describe our work as epoxy poly garage floors, and why it lasts up to 5x longer than typical epoxy. Watch the two side by side on our coating demo page.

01 / 04A blend you can't buy at the storePenntek's proprietary pure polyurea basecoat runs over 99% solids and bonds chemically to ground concrete. It flexes with the slab where epoxy stays rigid and cracks.
02 / 04Installers trained to prep it rightHighly trained, certified installers do the grinding with industrial diamond tooling, repair cracks with Penntek Mender and test every slab first. Prep decides whether a floor lasts five years or forty.
03 / 04Lifetime coverage from PenntekEach floor carries a limited lifetime warranty backed by Penntek itself, a manufacturer working in 200+ markets. Your coverage isn't tied to one small shop staying in business.
04 / 04The stronger floor overallUp to 5x the lifespan of typical epoxy, built for 30 to 40 years. In Penntek's words, A Bond Stronger Than Concrete, with the lowest lifetime cost of ownership.
Watch the side-by-side tests →How the Penntek warranty works →
Not your typical epoxy crew

Professionally trained installers

Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Certified Penntek Dealer

What "Certified Penntek Dealer" actually means

  1. 01Vetted before trainingPenntek reviews every company first. Many never make it to training.
  2. 02Hands-on training at PenntekChemistry, slab analysis, prep, application and troubleshooting, taught by Penntek’s technical team.
  3. 03Exclusive formulasPenntek’s proprietary polyurea is sold only to certified dealers. You can’t buy it at a store.
  4. 04Backed on every jobPenntek’s technical support team backs our crew from prep to finish, and Penntek backs your floor’s limited lifetime warranty.
What we coat in Bellevue

Any concrete, inside or out.

Garages are most of what we do in Bellevue, but the same Penntek system protects patios, pool decks, basements and commercial floors.

Garage floorsEpoxy poly garage floors for Bellevue homes, from one-car to four-car.Patios & walkwaysWeather-ready, slip-resistant coatings for outdoor concrete.Pool decksA good-looking, durable finish around the water.BasementsMoisture-tested coatings for finished and unfinished basements.Commercial floorsShops, showrooms and clinics in and around Bellevue.
Simple steps

How Your Bellevue Floor Comes Together

Three steps, no pressure. For an hour-by-hour look at install day, read our Bellevue installation timeline or see the install process overview.

  1. 01Book your free in-home quoteWe visit, measure, meter moisture in several spots and scratch test the surface. You'll see the readings and get a written quote, no pressure.
  2. 02Let the crew take the dayEmpty the garage and we grind, repair, coat and clean up, usually in one day. The crew gives you walk-on and parking times before they head out.
  3. 03Pull back in and enjoy itPut the cars, bikes and gear back. Wipe up spills with ease. Your floor is protected by a limited lifetime warranty backed by Penntek.
The crew behind the floor

We Test First, Then Build Your Floor Around the Numbers

Cascade Concrete Coatings is a Certified Penntek Dealer based up the road in Woodinville. Bellevue is a regular stop for us, from Bridle Trails down to Newport Hills.

The garage with mineral stains is a good example of how we work. Instead of one reading, it got four: 4.5% in the stained corner, 4.5% in the middle, then 4.2% and 4.1%. Spreading tests out shows whether one part of a slab is wetter than the rest. That told us how to build the floor before we promised anything.

Our crew then diamond grinds, fixes cracks with Penntek Mender, works around cabinets on leveling legs and adds a moisture barrier where the readings call for one. The car goes back in soon after.

See the full install process →
Is it right for you?

Is a Penntek floor right for your Bellevue home?

You're probably a great fit if any of these sound familiar.

Color choices

Choose a Color That Matches Your Cabinets and Your Life

Homeowners here tend to choose color to match the room. Smoke tied together a wall of black and silver cabinets. Mount Everest made a wood-paneled two-bay feel bright. Flint matched a garage to the covered front walk.

Think about your cabinets, wall color and how much road grime comes home off I-405 each week. Darker blends forgive more. Lighter ones open up a space. See the full Penntek color lineup and we'll bring samples to try in your light.

SmokeEvolution FlakeGrey, black and white flake that hides dirt and tire marks. Smoke is a natural match for the dark cabinetry that shows up in so many Bellevue garages.Mount EverestEvolution FlakeWhite and light grey flake that makes a garage feel bigger and brighter. Mount Everest suits wood-paneled or dim two-bay garages in older Lake Hills and Crossroads homes.FlintEnviroflakeA darker charcoal and brown-grey Enviroflake that hides wear. Flint works well when you want the garage and a covered entry walk to match.Tidal WaveEvolution FlakeCascade's most installed color, a blue-grey, white and black flake. It went into a Bellevue EV garage and handles daily driving without showing every tire track.Silver CreekEvolution FlakeA deeper grey and brown flake that stays clean looking in busy spaces. It held up the look of a local event room under stage lights and constant setup.
See every color and system →
Bellevue proof

Floors Your Neighbors Already Park On

These six jobs cover a lot of ground. A remodel that used the garage as a carpentry shop all winter. A commercial performance space. Two cars and a furnace. A garage and front walk that had to match.

The common thread is the process. Every slab was tested, ground and coated with the same concrete coating system. Browse more Eastside work in the complete portfolio.

Coyote flake polyurea floor in a bright white remodeled garage in Bellevue
BellevueOct 2026Coyote Flake Garage Floor After a Bellevue Remodel
All winter this garage was the carpenters' shop, full of saw horses, trim and paint buckets. We visited mid-remodel in February to plan, then came back in May once the trades were gone. One day later the scuffed, glue-spotted slab was a finished Coyote flake floor.
See this project →
Reviews

Hear it from your neighbors.

All reviews →
Loading Google reviews…
Free in-home quote in Bellevue

Get the Bellevue garage floor everyone wishes they had.

An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.

Book my free quote425-226-6085
Across Bellevue

Somerset, Lake Hills, Newport Hills and Your Street Too

Bellevue garages change a lot from one neighborhood to the next. Lake Hills, Crossroads and Eastgate are full of 1950s and 1960s ramblers and split-levels, many with older slabs that have been painted at least once. Somerset and Newport Hills have view homes on hillsides, often with steps up into the house and bigger garages. Bridle Trails has larger lots and shop-style garages.

West Bellevue and the neighborhoods near Meydenbauer Bay are seeing a lot of remodels and rebuilds, where the garage ends up as the carpenters' shop until the very end. Around Wilburton, Factoria and Woodridge, newer townhomes and condos often have tight garages with EV chargers on the wall. Up toward Lakemont and Cougar Mountain, homes sit on slopes where groundwater can find the low corner of a slab.

We also work across the lake and around it. Find us in Medina, on Mercer Island, in Newcastle and up in Kirkland. For city background, see Bellevue on Wikipedia or the City of Bellevue site for permits during a remodel.

Nearby we also serve
MedinaMercer IslandKirklandNewcastleRedmondSeattle
Short term vs long term

What Happens Five Years After You Pick a Floor

Picture the low-cost route. A thin epoxy coating goes down quickly. A couple of winters later the parking lanes start to peel, the sunny end by the door turns yellow and a damp corner bubbles. You empty a full wall of cabinets' worth of stuff, pay to grind it all off and start over.

Now picture the other route. One day of real prep and a Penntek floor. Five years on, your garage still looks like the rest of the house. Oil wipes up. Brake dust and road salt rinse away. The floor is built to last 30 to 40 years, and if you ever sell, buyers notice. Our post on how a premium garage floor helps resale goes into that.

Bellevue questions

What Bellevue homeowners ask us

Don't see yours? Call 425-226-6085 and an owner will answer it.

What goes into the cost of a Bellevue garage floor?+
The cost of a Bellevue garage floor depends on size, how much old paint or coating has to be ground off, crack repair, steps and stem walls, and whether moisture readings call for a barrier. A big 815 square foot garage with two steps is a different job than a compact townhome bay. Your in-home quote is free.
Why do you test Bellevue slabs in more than one spot?+
We test Bellevue slabs in more than one spot because moisture is rarely even across a garage. One EV garage with mineral stains read 4.5% in the corner and middle, and 4.2% and 4.1% elsewhere. Several readings show whether a moisture barrier is needed and where.
Can you install a floor in Bellevue during cold weather?+
Yes, we install floors in Bellevue during cold weather. One 815 square foot garage was coated the day before Thanksgiving with the air at 45°F. On install day the crew checks slab moisture and temperature and gives you walk-on and parking times before they leave.
How long does a Penntek garage floor last?+
A Penntek garage floor is built to last 30 to 40 years, up to 5x the lifespan of typical epoxy. It's backed by a limited lifetime warranty from Penntek. The polyaspartic topcoat resists hot tires, oil and road salt, so everyday driving doesn't wear it down.
Is a polyurea floor better than epoxy for my Bellevue garage?+
Yes, polyurea outperforms typical epoxy in a Bellevue garage. Epoxy is rigid and tends to peel, yellow and lift under hot tires. Penntek polyurea is over 99% solids, flexes with the slab and bonds chemically at 1,300+ PSI. Many people call it an epoxy polyurea floor because it looks similar.
Will the floor stand up to EVs and hot tires?+
Yes, the floor stands up to EVs and hot tires. The polyaspartic topcoat is non-porous and resists hot tire pickup, oil, salt and chemicals. Heavy electric cars are no problem. Our post on EV chargers and garage floor coatings covers charger placement.
What colors hide road grime from I-405 and I-90?+
Multi-tone grey flakes like Smoke, Flint, Silver Creek and Tidal Wave hide road grime from I-405 and I-90 well between washes. They break up grit, salt residue and wet tire marks. Lighter Mount Everest looks great but shows a bit more.
Do you work in my Bellevue neighborhood?+
Yes, we work in every Bellevue neighborhood, including Somerset, Newport Hills, Lake Hills, Crossroads, Bridle Trails, West Bellevue, Wilburton, Factoria, Eastgate, Woodridge and Lakemont. Quotes and installs are easy to schedule from our base in Woodinville.
Do you coat commercial spaces in Bellevue?+
Yes, we coat commercial spaces in Bellevue as well as homes. A local performance and event space got Silver Creek flake scheduled around its calendar. Our guide on commercial vs residential coatings explains the differences.
Is the install really one day?+
Yes, the install is one day for a typical garage. Grinding, crack repair, basecoat, flake and topcoat all happen in the same visit. Larger spaces or slabs needing extra moisture layers may take longer, and we tell you that up front.
What warranty comes with a Bellevue floor?+
A Bellevue floor from us comes with a limited lifetime warranty backed by Penntek, the manufacturer. That's coverage from a company in 200+ markets, not only from us. We'll walk you through the specific terms at your free in-home quote.
Does Cascade Concrete Coatings install epoxy garage floors in Bellevue?+

Yes. We install epoxy poly garage floors across Bellevue using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.

Do you coat patios, walkways and pool decks in Bellevue?+

We do. The same Penntek system that protects garages works on outdoor concrete around Bellevue, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.

Do you handle commercial concrete coatings in Bellevue?+

Yes. We coat shops, showrooms, clinics and service bays in and around Bellevue. See our commercial projects.

How do I get a quote for my Bellevue garage floor?+

Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.

Being upfront

A Note From Us to Bellevue

To be upfront, we wrote this page so people in Bellevue looking up epoxy garage floors and concrete coatings would find a local Penntek crew. Since you're reading, we made sure every project and number here is real.

We're glad you stopped by. Call 425-226-6085 or schedule a free in-home quote whenever you're ready.

Nicole and Sheldon, owners

Give Your Bellevue Garage the Floor It's Missing

Call 425-226-6085 or book a free in-home quote. We'll test the slab, bring samples and give you a clear written plan.

Get my free quote425-226-6085
All 30 cities we serveService area overview →
Ames LakeBellevueBothellCarnationDuvallEdmondsEverettIssaquahKenmoreKentKirklandLake Forest ParkLake StevensLynnwoodMarysvilleMedinaMercer IslandMill CreekMonroeMount VernonMukilteoNewcastleRedmondRentonSammamishSeattleShorelineSnohomishStanwoodWoodinville