Certified Penntek dealer / Woodinville, WAServing Seattle & the EastsideLimited lifetime warranty
Cascade Concrete Coatings
425-226-6085Get a free quote
Kent Epoxy Poly Coated Garage Floors & Concrete Coatings

A Kent Garage That Works Hard Needs More Than Epoxy

Jacks, creepers, oil drips and wet tires. We repair the cracks, grind off the old paint lines and coat your Kent garage or shop floor with Certified Penntek polyurea.

✓Certified Penntek dealer✓Limited lifetime warranty✓Most garages done in one day
Kent garage floors

Most Kent homeowners want a garage floor that still looks new in twenty years. Finding one is hard, because a lot of epoxy installers rush the prep and roll on a coating that's built to be redone.

Don't get stuck redoing your floor every few years. We'll test your Kent slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.

The short answer

Cascade Concrete Coatings, a Certified Penntek Dealer, installs epoxy-style garage floor coatings in Kent with Penntek polyurea instead of epoxy, for homes, multi-bay shops and commercial spaces. We test every slab for moisture and hardness at a free in-home quote. A typical garage is done in one day, larger shops take a few, and every floor carries a limited lifetime warranty backed by Penntek. Call 425-226-6085.

Real floors in and around KentSee all Kent projects →
6finished floors in and around Kent
Up to 5xthe lifespan of typical epoxy
30 to 40year floor, built to bond with your slab
1 dayinstall for a typical garage
Where the real work happens

What Your Kent Garage Floor Goes Through Every Week

In a lot of Kent homes, the garage is not storage. It is the shop. Floor jacks roll across it, creepers slide under the truck, wrenches drop and oil drips into the same spot every Saturday. In winter, wet tires bring in water and grit off SR 167 and I-5.

The ground underneath matters too. The city spreads across the flat Green River valley and climbs East Hill and West Hill on either side. Slabs on low valley ground can pull moisture from below, and hillside garages take runoff down the driveway.

Older garages here often carry history on the slab: painted parking lines, sealers, patched pours and long cracks. A coating rolled over all that without grinding is the floor that chips under a dropped tool and peels where the hot tires sit.

What we deliver

We'll turn your Kent garage into a floor you only buy once.

Every Kent job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.

Kent before and after

Real Kent floors, before and after.

Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.

↔BeforeAfter
Certified Penntek vs. typical epoxy or poly

Kent garage floors fail six ways. We beat all six.

The coating is only half of it. Watch the same slab go through what a Kent garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.

The right system for your concrete

Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.

Moisture & hardness tested
Typical epoxy or cheap polySame slab
✕Moisture pushes up from the slab. Blisters and peeling follow.
Certified Penntek by CascadeSame slab
✓Tested first. A moisture barrier goes down when the slab needs one.
Score after round 1Certified Penntek 1, typical epoxy or poly 0
The Penntek advantage

Not all coatings are equal. Watch.

Side-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.

Stain testOil, brake fluid and road grime wipe right off the non-porous Penntek topcoat, where typical epoxy can absorb stains.
Stretch testPenntek’s flexible basecoat stretches with the concrete. Brittle epoxy cracks and lets go.
Hammer testDropped tools are part of garage life. Typical coatings chip. Penntek resists chips and dents.
Watch the full side-by-side tests →

Settling for a quick epoxy job can leave your Kent garage peeling by year five.

A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.

✕Peeling where your tires sitSome installers skip diamond grinding, so the coating never truly grips your slab. Hot tires can lift it right off.
✕Yellowing by the garage doorMany epoxies amber in sunlight, so the first few feet of your floor turn a different color than the rest.
✕Cracks showing throughSome crews coat right over cracks. Every bit of slab movement shows up in your floor within a season or two.
✕Moisture blistersPuget Sound slabs hold moisture. Skip the testing and water vapor can push the coating up in bubbles.
✕Paying for it twiceTypical epoxy problems often show in years 3 to 5. Every redo means emptying your Kent garage and starting over.

We know your garage is more than a place to park. It's part of your home.

For a lot of Kent families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.

Nicole and Sheldon, owners of Cascade Concrete Coatings
The after

Picture pulling into a Kent garage you're proud of.

Here's what a Certified Penntek floor from our team gives you, long after install day.

✓Clean up in secondsThe non-porous topcoat shrugs off oil, salt and road grime, so a quick wipe keeps your garage looking finished.
✓Color that stays trueFadeLock UV stability keeps the floor by the open door matching the back wall, year after year.
✓A floor that moves with your slabThe flexible basecoat handles Northwest temperature swings and settling, so your Kent floor doesn't crack with the concrete.
✓Your garage back in a dayA typical garage is finished in one day. Before we leave, the crew gives you clear walk-on and parking times.
✓Coverage that outlasts any one shopYour limited lifetime warranty is backed by Penntek, the manufacturer, so it isn’t tied to one small company.
✓A garage that adds to your homeA finished, showroom-clean floor makes a strong first impression for guests, and for buyers when it’s time to sell.
Performance at every layer

Typical epoxy is one coat. Ours is a system.

Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.

01020304

When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.

Polyurea, not epoxy

Why a Working Garage Floor Gets Penntek Polyurea

Homeowners and shop owners here usually ask for an epoxy floor or epoxy poly garage floors, and the install will look familiar. The product is Certified Penntek polyurea, and in a working garage it holds up for four reasons that work as one package.

  • Penntek's proprietary pure polyurea blend. Better than 99% solids, with no fillers, and only certified dealers can buy it.
  • Certified installers who are highly trained in prep. Industrial diamond grinding takes off old paint lines and sealers, and Penntek Mender fills the cracks.
  • A limited lifetime warranty backed by the manufacturer. Penntek stands behind it, not just the crew that put it down.
  • A tougher product overall. The bond to the slab tops 1,300 PSI, and Penntek rates it at up to 5x the lifespan of typical epoxy.

A shop floor lives or dies by its bond and its topcoat. Rolling jacks and dropped tools chip brittle epoxy. A flexible, chemically bonded basecoat under a polyaspartic topcoat takes the hit. See the bond test for yourself in the side-by-side epoxy and Penntek demo.

01 / 04A pure polyurea only dealers getPenntek's proprietary blend is over 99% solids with no fillers. It forms a chemical bond with your slab at over 1,300 PSI. A Bond Stronger Than Concrete is not just a slogan.
02 / 04Prep from trained, certified crewsHighly trained certified installers grind off old paint lines and sealers, fill cracks with Penntek Mender and test moisture. In a working garage, that prep is what stops chips and peeling.
03 / 04Backed by Penntek, not just usYour floor carries a limited lifetime warranty backed by Penntek, a manufacturer in 200+ markets. That coverage does not depend on one installer's business lasting.
04 / 04Tougher where it countsThe polyaspartic topcoat resists hot tire pickup, oil, salt and chemicals. FadeLock UV stability passed a 16-hour QUV test. Penntek rates it as a 30 to 40 year floor.
Watch the side-by-side tests →How the Penntek warranty works →
Not your typical epoxy crew

Professionally trained installers

Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Certified Penntek Dealer

What "Certified Penntek Dealer" actually means

  1. 01Vetted before trainingPenntek reviews every company first. Many never make it to training.
  2. 02Hands-on training at PenntekChemistry, slab analysis, prep, application and troubleshooting, taught by Penntek’s technical team.
  3. 03Exclusive formulasPenntek’s proprietary polyurea is sold only to certified dealers. You can’t buy it at a store.
  4. 04Backed on every jobPenntek’s technical support team backs our crew from prep to finish, and Penntek backs your floor’s limited lifetime warranty.
What we coat in Kent

Any concrete, inside or out.

Garages are most of what we do in Kent, but the same Penntek system protects patios, pool decks, basements and commercial floors.

Garage floorsEpoxy poly garage floors for Kent homes, from one-car to four-car.Patios & walkwaysWeather-ready, slip-resistant coatings for outdoor concrete.Pool decksA good-looking, durable finish around the water.BasementsMoisture-tested coatings for finished and unfinished basements.Commercial floorsShops, showrooms and clinics in and around Kent.
How we get it done

Three Steps to a Kent Floor You Can Work On

A typical two-car garage is a one-day job. A multi-bay space like the one we coated in town takes several days. Either way, it starts with a visit.

  1. 01Walk the slab togetherAt your free in-home quote we meter moisture, scratch test hardness, map cracks, old paint and joints, and measure every bay. You get a written quote.
  2. 02Grind, repair and coatWe grind to bare concrete, fill cracks, add a moisture barrier if needed, then lay basecoat, flake and topcoat. The crew lets you know walk-on and parking times when they finish.
  3. 03Get back to workRoll the jack, drop the wrench, hose out the bay. Your floor is backed by a Penntek limited lifetime warranty.
The guide you hire

You Run the Shop. We Make Sure the Floor Can Keep Up.

Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, about 26 miles north, which puts this city at the far south edge of where we work. We have finished one big job in town, a multi-bay garage, and more across south King and Pierce County, from Edgewood and Enumclaw to Gig Harbor and Tacoma.

On the Kent job, the crew walked the whole space before quoting. They mapped the long cracks through the main bays, the joints between pours, the stained patches near the side wall and the old white paint lines. Then they measured where those lines sat so a fresh guide stripe could go back in the right place.

That is how we approach every working garage. Moisture readings, a hardness scratch test and a full look at what the slab has been through, all before you see a number.

See the full install process →
Is it right for you?

Is a Penntek floor right for your Kent home?

You're probably a great fit if any of these sound familiar.

Colors that work

Pick a Floor That Hides Grease, Grit and Tire Marks

A working floor needs a forgiving color. Domino and Tidal Wave hide tire marks and grit between cleanings, and Silver Creek keeps a busy bay looking tidy. For a business floor, a solid like Medium Grey gives a clean, professional look. Our Kent garage even got a custom blue, white and black flake with a single blue guide stripe.

See every blend and solid in the Cascade colors and styles page.

DominoEvolution FlakeHigh-contrast black, white and grey flake. Domino hid a web of repaired cracks in Edgewood and keeps a workshop floor looking sharp through grease and grit.Tidal WaveEvolution FlakeCascade's most installed color. The blue-grey, white and black chips of Tidal Wave hide tire marks and work well in big multi-car garages.Silver CreekEvolution FlakeA deeper grey and brown flake that keeps a busy bay looking clean. Silver Creek handled rust drips and a motorcycle spot in Enumclaw.Medium GreySolid ColorA solid medium grey for shops and commercial floors. It gives a business space in the valley a clean, professional look, as it did in Tacoma.Mount EverestEvolution FlakeWhite and light grey flake that brightens a garage. Mount Everest went over a moisture barrier in Gig Harbor and suits a home garage on East Hill.
See every color and system →
Proof in and around Kent

One Big Kent Garage and Five South Sound Neighbors

We lead with the Kent job because it is the one closest to home, a huge space with several roll-up doors. The others come from Edgewood, Enumclaw, Gig Harbor, Fox Island and Tacoma, each labeled with its real town. Together they cover the problems local floors bring: cracks, rust drips, failed old coatings, moisture and heavy commercial traffic.

One of them is a business floor, which matters if you run a shop or warehouse in the valley. Browse the rest of our garage and commercial floor portfolio for more.

Close view of navy, white and black flake on a Kent garage floor
KentOct 2026Blue Flake Shop Garage Floor in Kent
Our job right here in Kent. A multi-bay garage with roll-up doors, long cracks, oil stains and chipped white parking lines. The crew ground it all to bare concrete, filled the cracks with Mender and coated it in a blue, white and black flake blend in December 2024, with one crisp blue guide stripe.
See this project →
Reviews

Hear it from your neighbors.

All reviews →
Loading Google reviews…
Free in-home quote in Kent

Get the Kent garage floor everyone wishes they had.

An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.

Book my free quote425-226-6085
Valley and hills

East Hill, West Hill or the Valley, Your Garage Is on Our Map

We work all over Kent. East Hill and the neighborhoods out toward Lake Meridian and Panther Lake, West Hill above the valley, Scenic Hill near downtown and Kent Station, and the homes and businesses spread along the Green River valley floor. Garages range from single-car spaces in older neighborhoods to big detached shops and multi-bay buildings.

The valley went from farmland to one of the region's big warehouse districts, and the Kent history on Wikipedia tells that story well. The City of Kent website lists permits for other projects. Our post on commercial vs residential garage floor coatings helps if your floor is part of a business.

We also install concrete coatings in Renton, Seattle, Newcastle and Issaquah.

Nearby we also serve
RentonSeattleNewcastleIssaquahBellevueMercer Island
The choice

A Kit That Chips, or a Floor That Takes the Abuse

A weekend kit in a working garage has a short life. Hot tires pull it up. A dropped wrench leaves a crater. Brake fluid and oil soak through the thin spots, and by the third winter you are scraping flakes off the slab. Our post on DIY vs professional concrete coating installation explains why.

A Certified Penntek floor flips that. Wipe the oil, sweep the grit, hose out the bay and get back to work. The finish by the door keeps its color even with the roll-ups open all day. It is the longest-lifespan concrete coating with the lowest lifetime cost of ownership, according to Penntek, and you put it down once.

Kent questions

What Kent homeowners ask us

Don't see yours? Call 425-226-6085 and an owner will answer it.

What sets the price of a Kent garage floor coating?+
The price of a Kent garage floor coating is set by square footage, number of bays, crack repair, old paint lines or coatings to grind off, cove base and whether the slab needs a moisture barrier. A two-car garage and a multi-bay shop are very different jobs. We measure and test at a free in-home quote and give you a written number.
Do Kent valley slabs have moisture problems?+
Kent valley slabs can carry moisture, especially on low ground near the Green River. Nearby slabs we tested read anywhere from 2.6% to 6.0%. In Gig Harbor, a 6.0% reading on install day meant a moisture barrier first. We test every slab before quoting so you know your plan up front.
Can you coat a Kent shop or garage floor in winter?+
Yes, we coat Kent shop and garage floors in winter. Our multi-bay job in town went down in December, and plenty of epoxy poly garage floors go in during the wet months. The crew checks slab moisture and temperature on install day and tells you walk-on and parking times before they leave.
How long will a Penntek floor last in a Kent workshop?+
A Penntek floor in a Kent workshop is rated as a 30 to 40 year floor, with up to 5x the lifespan of typical epoxy. The flexible basecoat absorbs impacts and slab movement, and the polyaspartic topcoat resists oil and chemicals. Typical epoxy often chips and peels within a few years.
Why do epoxy floors chip in a working garage, and are epoxy poly floors different?+
Epoxy floors chip in a working garage because typical epoxy is hard, brittle and holds on mostly by surface grip. Rolling jacks, dropped tools and hot tires break it loose. An epoxy poly floor from Cascade is really Penntek polyurea, which bonds chemically and flexes, so it takes those hits without letting go.
Does the floor resist hot tire pickup and EV weight?+
Yes, the floor resists hot tire pickup and handles heavy EVs. The polyaspartic topcoat is non-porous and built to stand up to warm tires, oil and salt. Our post on preventing hot tire pickup on a garage floor goes deeper.
Can you remove old painted lines and coat a shop floor?+
Yes, we can remove old painted lines and coat a shop floor. On our multi-bay job the crew measured where the lines sat, ground everything to bare concrete, then coated the floor and added a single blue guide stripe. Commercial floors get the same system with scheduling around your business.
Which colors hide grease and road grit in Kent?+
High-contrast flakes like Domino and mid-tone blends like Tidal Wave and Silver Creek hide grease and road grit in valley garages. Solid colors look clean in commercial spaces but show more. We bring real samples so you can compare under your own lights.
Do you serve East Hill, West Hill and the valley?+
Yes, we serve East Hill, West Hill, the valley floor and every other Kent neighborhood, including Lake Meridian, Panther Lake and Scenic Hill. The city is the south edge of our area, about 26 miles from Woodinville, and the in-home quote is free.
Is a Kent garage floor finished in one day?+
A typical Kent garage floor is finished in one day. Large multi-bay shops and commercial spaces take longer. Our multi-bay garage here took several days, and so did the Tacoma facility. We give you an honest timeline at the quote.
Who backs the warranty on a Kent floor?+
Penntek, the manufacturer, backs the limited lifetime warranty on a Kent floor we install. That means the coverage does not depend on one local installer staying in business. We record slab readings and install conditions on your warranty paperwork.
Does Cascade Concrete Coatings install epoxy garage floors in Kent?+

Yes. We install epoxy poly garage floors across Kent using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.

Do you coat patios, walkways and pool decks in Kent?+

We do. The same Penntek system that protects garages works on outdoor concrete around Kent, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.

Do you handle commercial concrete coatings in Kent?+

Yes. We coat shops, showrooms, clinics and service bays in and around Kent. See our commercial projects.

How do I get a quote for my Kent garage floor?+

Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.

Plain talk

We Wrote This Page Hoping Kent Would Find It

We built this page so people in Kent searching for epoxy garage floors or concrete coatings would find a Certified Penntek crew that has already coated a big shop in town and knows the valley's slabs. If you found us that way, we appreciate you reading.

Have a garage, shop or business floor that needs fixing? Request your free in-home quote and we will walk it with you.

Nicole and Sheldon, owners

Ready to Put Your Kent Floor to Work?

Book a free in-home quote and we will walk your garage or shop, test the slab and give you a written number. Call 425-226-6085.

Get my free quote425-226-6085
All 30 cities we serveService area overview →
Ames LakeBellevueBothellCarnationDuvallEdmondsEverettIssaquahKenmoreKentKirklandLake Forest ParkLake StevensLynnwoodMarysvilleMedinaMercer IslandMill CreekMonroeMount VernonMukilteoNewcastleRedmondRentonSammamishSeattleShorelineSnohomishStanwoodWoodinville