Don't get stuck redoing your floor every few years. We'll test your Lake Forest Park slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer based in Woodinville, installs epoxy-style garage floor coatings in Lake Forest Park. The floor is Certified Penntek polyurea rather than epoxy, chemically bonded to diamond-ground concrete at over 1,300 PSI. Every job starts with a free in-home quote that includes moisture and hardness tests, and most garages are coated in one day with a limited lifetime warranty backed by Penntek.
Most garages in Lake Forest Park do. The city grew up among tall firs and cedars on the hills above Lake Washington, with Lyon Creek and McAleer Creek cutting ravines through the neighborhoods. It is a beautiful place to live. It is also hard on concrete.
Shade means a slab rarely dries out between October and May. Slopes mean many garages sit under the house or partly below grade, where groundwater moves toward the foundation. Then there are the needles, cones and wet leaves that ride in on every tire. Over the years you get oil soaked into the parking area, a fine web of hairline crazing and a floor that always looks dusty.
A thin epoxy kit or a bargain concrete coating has a hard time on that kind of slab. It only grips the surface, it cracks over old joints and damp from below can push it loose. That is how peeling starts.
Every Lake Forest Park job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Lake Forest Park garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Lake Forest Park families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
You searched for epoxy. Most people do, and plenty of neighbors call our work epoxy poly garage floors because the install steps look alike. The floor is Certified Penntek polyurea, and what makes it different is a set of four things.
The bond is chemical, over 1,300 PSI. The polyaspartic topcoat is non-porous, so water, needles and mud stay on top where a squeegee or hose can move them. It resists hot tire pickup, oil, salt and chemicals, and FadeLock™ UV stability passed a 16-hour QUV test. Our post on the Lake Washington climate and garage floors goes deeper, and you can watch the tests on our demo page.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Lake Forest Park, but the same Penntek system protects patios, pool decks, basements and commercial floors.
You will always know what happens next. The full process and installation guide lays out every stage.
That would be us. Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, just up Bothell Way from you. We install one system, and we install it the way Penntek trains its certified installers to.
Your free in-home quote is where it starts. We take moisture readings in more than one spot, scratch test the concrete for hardness and look closely at oil stains and cracks. On the tuck-under garage we coated in town, the meter read 4.1% in one spot and 2.8% in another. Shaded slabs can swing like that from one end to the other, which is why a single reading is never enough.
If your concrete needs extra protection, we install a two-layer moisture barrier system before the polyurea. If it is ready, a typical garage is done in a day.
Not every slab here is a garage. Shaded patios, front walks and basement floors grow the same algae and haze, and the same concrete coatings protect them. Ask us to test those too while we are there.
You're probably a great fit if any of these sound familiar.
Under the trees, a floor needs to forgive. The tuck-under garage in town went with Smoke, a mid-gray flake that hides tire film and the dark bits that blow in from the driveway. Nearby, Tidal Wave has been the favorite. If your garage is dim, a lighter blend can help. Compare all of them on our colors page.
We will be straight with you. We have one published garage inside Lake Forest Park so far. So we have paired it with four floors just over the line in Mountlake Terrace and Bothell, each labeled with its real town. They share what matters here: damp winters, cracked slabs and concrete that needed honest prep.
One Bothell slab read as high as 6.9% after grinding, with the garage air near 80% humidity. That is the kind of reading you get in a shaded, low garage in January, and it is why we measure first. For a bigger picture, see our full project portfolio.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
Lake Forest Park is small, and we cover every corner of it. That includes the lakeside homes along Bothell Way and the Burke-Gilman Trail, the wooded hills above Lyon Creek and McAleer Creek, the streets around Town Center where Bothell Way meets Ballinger Way, and the quieter neighborhoods climbing west toward the Shoreline border.
Many homes here are mid-century houses on big, sloped, wooded lots. Split-levels and daylight basements are common, and so are garages tucked under the living space with joists overhead and a water heater in the back. Some sit at the bottom of steep driveways that funnel rain toward the door. We plan around all of that.
Planning work near a creek or on a slope? Check with the City of Lake Forest Park first. A garage floor coating stays inside the garage. You can learn more about the town on Wikipedia. We also coat floors next door in Kenmore, Shoreline, Bothell and Woodinville.
Here is how the shortcut usually goes. A quick etch, a thin epoxy coat and no moisture reading. One damp winter later, a white haze shows under the film. By the next, it is lifting where you turn the wheel. Then comes the grinding, the second floor and the second garage cleanout. If yours is already peeling, read what to do about a peeling epoxy floor.
The other road is calmer. A tested slab, a chemical bond and a topcoat you can hose off. Needles and mud become a two-minute sweep. The floor looks the same in fifteen years as it did the week after install, and you never think about it again.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Lake Forest Park using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Lake Forest Park, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Lake Forest Park. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
We wrote this page so people in Lake Forest Park searching for epoxy garage floors and concrete coatings would find us. We would rather earn that click with real readings than with fluff, so that is what we put here.
We know your town has only one of our floors so far. We would like to make it two. Call 425-226-6085 and we will bring the moisture meter.
Book a free in-home quote in Lake Forest Park. We will test your slab, measure your garage and talk colors in your own light. Call 425-226-6085.