Don't get stuck redoing your floor every few years. We'll test your Mercer Island slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer, installs epoxy-style garage floor coatings on Mercer Island with Penntek pure polyurea, a tougher alternative to epoxy. We test moisture and hardness at a free in-home quote, then grind, repair and coat. Most garages take one day, and big lower-level garages may take two. Every floor has a limited lifetime warranty backed by Penntek.
On Mercer Island, Lake Washington is never far away, and neither is damp air. Plenty of homes are built into steep lots, so the garage ends up on a lower level, partly below grade, with closets, storage rooms and mechanical spaces branching off it.
Those slabs take a beating that's easy to miss. Chalky spots, patched sections, old stains in the corners and dust that never quite goes away. Newer homes have their own issue. The concrete can still be moving, with saw-cut control joints and small cracks that show up after the first winter.
Add the drive home across I-90 on a wet evening, and bare concrete soaks up road water, grit and drips every single day.
Every Mercer Island job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Mercer Island garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Mercer Island families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Most people search epoxy garage floors first, and the finished look is the same idea: a flake floor with a glossy topcoat. The difference is what holds it on.
Typical epoxy is a rigid film that grips the surface. Below-grade garages and lakeside slabs move moisture vapor up through the concrete. Rigid films can't take that pressure, so they bubble and peel. When a slab cracks, the epoxy cracks with it and the edges start to lift.
Penntek is a proprietary pure polyurea blend, over 99% solids, chemically bonded to ground concrete at 1,300+ PSI. It flexes with the slab. When readings run high, the crew adds a two-layer moisture barrier system first. On top, a non-porous polyaspartic topcoat resists hot tire pickup, oil, salt and chemicals, and FadeLock™ UV stability passed a 16-hour QUV test.
Folks often call that an epoxy poly garage floor. Whatever the name, it's built to last 30 to 40 years. Watch the bond test on the epoxy vs polyurea demo.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Mercer Island, but the same Penntek system protects patios, pool decks, basements and commercial floors.
Simple and pressure-free. For a closer look at grinding, repair and coating, visit our installation steps page.
We're Cascade Concrete Coatings, a Certified Penntek Dealer based in Woodinville. We cross the bridge for island jobs regularly, and we treat each one like it's the only one on the calendar.
Island concrete coatings get the same process we use everywhere, with extra attention to moisture. Lower-level slabs and lakeside lots are exactly where shortcuts show up first, so we don't take them.
Here's an example of what that looks like. A Mercer Island homeowner had a newer two-car garage coated in Mount Everest flake in November 2025. That winter the slab developed a new crack. Our crew came back, repaired it and blended the repair into the floor. That's a story we're proud to tell.
Testing comes first on every job. A large lower-level garage got three readings, 4.3%, 4.7% and 2.7%, because slabs are rarely uniform from front to back. We also ran a scratch test for hardness. Those results set the grind and the moisture plan.
You're probably a great fit if any of these sound familiar.
Lower-level garages often get limited natural light, which is why Mount Everest, a white and light grey flake, worked so well in our first island garage. It makes the room feel bigger.
Rhino Grey, a single-color 1/4 inch flake, went into the large lower level with four glass-panel doors. It gives a calm, even grey across the main garage and every side room. Darker blends like Smoke hide more grit. See the styles and colors collection.
We have two finished Mercer Island garages in the portfolio so far. To round things out, we've included nearby projects with the same challenges island homes face: an under-house garage in Seattle tested four times, a damp slab out on Hood Canal that needed a moisture barrier, and a big Bellevue two-bay just across the East Channel.
We think it's more useful to show you how we handle moisture and tricky garages than to pretend we've done more here than we have. Browse everything on the project portfolio.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
Mercer Island garages vary as much as the island does. In the North End and East Seattle neighborhood, you'll find older homes with tuck-under garages and slabs that have been patched and painted over the years. Around First Hill and Mercerdale, near Town Center, homes are tighter and garages double as storage for bikes and beach gear headed to Luther Burbank Park.
Mid-Island and the South End have more steep, wooded lots, where garages often sit on a lower level with closets, mechanical rooms and stairs up into the house. Waterfront homes add humidity to the mix. Newer rebuilds across the island bring fresh concrete that still needs testing, since new slabs can hold a lot of water from the pour.
Off the island, we coat floors in Bellevue across the East Channel, Seattle across the West Channel, Newcastle and Renton. The Mercer Island Wikipedia page covers the island's history, and the City of Mercer Island site lists permit info for remodels.
Not all concrete coatings handle a below-grade slab. Here's how the cheap route usually plays out on a lower-level garage. A thin epoxy layer goes on bare concrete without real prep or a moisture plan. Within a few years, vapor from below lifts it into bubbles and flakes. Now you're moving everything out of the garage and every side closet, then paying to grind the failure off.
The other route looks like this. A crew tests in several spots, grinds and repairs, adds a barrier if the numbers say so and lays down a Penntek floor. Years later, the flake still looks new and the closets still match the main room. If the slab moves and a crack appears, the floor can be repaired. Our post on repairing concrete coatings after damage explains how.
For more on why we never skip the meter, read our moisture testing article.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Mercer Island using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Mercer Island, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Mercer Island. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
An honest word: we built this page so people on Mercer Island searching for epoxy garage floors and concrete coatings would find a Certified Penntek crew that has worked on the island. We kept it to real projects and real numbers.
Glad you found us. Call 425-226-6085 or book a free in-home quote and we'll come across the bridge with the meter.
Call 425-226-6085 or book a free in-home quote. We'll meter your slab and bring flake samples across the bridge.