Don't get stuck redoing your floor every few years. We'll test your Issaquah slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer, installs epoxy-style garage floor coatings in Issaquah with Penntek polyurea, a stronger alternative to epoxy. We have finished four garages in Issaquah, testing each slab for moisture and hardness at a free in-home quote. Most garages are ground, repaired and coated in one day, with a limited lifetime warranty backed by Penntek. Call 425-226-6085.
Issaquah sits in a creek valley ringed by Cougar, Squak and Tiger Mountains. Rain runs off those slopes, collects along driveways and finds the lowest edge of your garage. On one local job the drywall bottom and baseboard in a corner were stained from water creeping in along the wall base. That edge never looks clean, no matter how often you sweep.
Up in the Issaquah Highlands and on Squak, cold snaps bring snow. Slush and deicer ride home on your tires and melt into bare concrete. Down in the valley, cars drip road spray from I-90 all winter.
Then there is the shape of the garages themselves. We have coated a long, narrow bay with tall concrete walls, a garage mid build-out with new cabinets and a slab with a crack running across the main bay. Odd shapes and wet edges are where cheap concrete coatings give up first.
Every Issaquah job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Issaquah garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Issaquah families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Plenty of homeowners here ask us for an epoxy floor or an epoxy polyurea floor by name, or for concrete coatings in general. That is a fair way to describe the look and the install day. The product we put down is Certified Penntek polyurea, and the reason it outlasts kit epoxy is a combination of four things.
For a valley garage, the bond is the headline. Water that creeps in along a wall base gets under a surface-grip coating and lifts it. A chemically bonded floor with a coated cove base keeps water on top, where you can squeegee it out. Watch the adhesion test on the side-by-side epoxy and Penntek demo.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Issaquah, but the same Penntek system protects patios, pool decks, basements and commercial floors.
Three steps, and only one of them asks you to move the car. Here is how it goes.
Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, about 17 miles from downtown Issaquah. We have finished four garages in Issaquah and more just up I-90 in North Bend and Fall City.
On a fall 2026 job in town the meter read 5.0% in one spot, 4.1% in another and 4.2% in a third, all on one slab. That spread is normal. It is also why we never test a garage in just one place. We check near the door and along the edges, where concrete tends to hold water longer, and we scratch test the surface for hardness.
Those numbers shape your quote. A slab that needs our two-layer moisture barrier system gets one, and you hear about it before you sign anything.
You're probably a great fit if any of these sound familiar.
A garage near trailheads and ball fields sees muddy boots, wet dogs and gear bags. High-contrast flake hides that mess between cleanings. Domino is the local favorite for exactly that reason.
If your garage is long, narrow or dim, a lighter blend like Mount Everest makes it feel bigger. Our styles and colors page shows every blend before we bring samples to your floor.
Each of these floors started with a different headache. Water marks at the wall base. A garage shaped like a hallway. A build-out with brand new cabinets to protect. A long crack across the main bay. Domino has been chosen twice around here, so you will see it in more than one project.
We also added a North Bend garage that went down on a 43°F November day, for anyone in the upper valley wondering about winter installs. More finished floors live in the Cascade portfolio.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
We come to every corner of town. The Issaquah Highlands and Talus, the homes on Squak and Cougar Mountain, the older streets near Front Street and Gilman Village, and the neighborhoods out toward Lake Sammamish State Park. Garages here range from compact bays under steep driveways to newer two-car garages with stairs and storage walls.
That range shows in our work. The narrow Mount Everest bay had a wooden stair platform over one end. The Husky build-out garage had cabinets, slatwall and a short stair to the house. Each needed a plan before a grinder came near it.
The City of Issaquah site covers permits for other projects, and the Issaquah article on Wikipedia has the town's mining and railroad history. We also work in Sammamish, Newcastle, Renton and Bellevue.
A weekend epoxy kit rolled onto an etched slab looks fine for a season. Then deicer and hot tires go to work, and it becomes clear an epoxy poly garage floor and a kit are not the same thing. It peels where you park, water gets under the edges and the corner by the wall base goes dark again. Fixing it means clearing the garage, grinding the failed layer off and paying for a second floor. Our post on what to do when an epoxy garage floor is peeling covers that mess.
The other version is quieter. You pull in from a snowy drive down from the Highlands, push the slush out the door and the floor underneath looks new. The cove base keeps the corners clean. Penntek calls it the longest-lifespan concrete coating with the lowest lifetime cost of ownership, and you only decide on it once.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Issaquah using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Issaquah, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Issaquah. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
We put this page together so people in Issaquah searching epoxy garage floors or concrete coatings would land on a crew that has actually ground and coated slabs in this valley. If that is you, thanks for reading this far. Glad you are here.
No pressure from us. Ask for a free in-home quote and we will bring the meter, the flake samples and straight answers.
Book a free in-home quote and we will test moisture and hardness before we talk flake. Call 425-226-6085 to set a time.