Certified Penntek dealer / Woodinville, WAServing Seattle & the EastsideLimited lifetime warranty
Cascade Concrete Coatings
425-226-6085Get a free quote
Everett Epoxy Poly Coated Garage Floors & Concrete Coatings

Shopping for an Epoxy Floor in Everett? Start With the Slab.

From auto shop bays to two-car garages, we've coated Everett concrete that works for a living. Certified Penntek polyurea, ground and tested first, installed in one day for a typical garage.

✓Certified Penntek dealer✓Limited lifetime warranty✓Most garages done in one day
Everett garage floors

Most Everett homeowners want a garage floor that still looks new in twenty years. Finding one is hard, because a lot of epoxy installers rush the prep and roll on a coating that's built to be redone.

Don't get stuck redoing your floor every few years. We'll test your Everett slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.

The short answer

Cascade Concrete Coatings, a Certified Penntek Dealer, installs epoxy-style garage floor coatings in Everett using Certified Penntek polyurea. The crew diamond grinds, repairs cracks, tests moisture and finishes a typical garage in one day. Local work includes two auto shops, a new commercial building and two home garages. Every floor carries a limited lifetime warranty backed by Penntek. Call 425-226-6085 for a free in-home quote.

Real floors in and around EverettSee all Everett projects →
5finished floors in and around Everett
Up to 5xthe lifespan of typical epoxy
30 to 40year floor, built to bond with your slab
1 dayinstall for a typical garage
Working floors in a working city

Your Everett Concrete Takes More Abuse Than You Think

Everett is a working town. Shifts at the Boeing plant by Paine Field, gear headed down to the Port of Everett, contractor trucks rolling onto I-5 and US 2 before sunrise. A lot of that life ends the day parked on a garage slab, and bare concrete keeps a record of all of it.

Concrete is porous. Oil, coolant, road film and the grit off wet winter tires soak in and stay. The surface sheds a fine grey dust that rides into the house on your shoes. Cracks open where the slab has settled, and the strip by the door darkens where rain blows in.

Plenty of people in town have tried a hardware store epoxy kit as a cheap concrete coating, or hired a fast roll-on job. Then hot tires lift it in patches, sun through the open door turns it amber, and moisture rising through the slab pushes it loose. The floor ends up looking worse than the bare concrete did.

This is a solvable problem. The fix just isn't another coat of the same thing.

What we deliver

We'll turn your Everett garage into a floor you only buy once.

Every Everett job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.

Everett before and after

Real Everett floors, before and after.

Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.

↔BeforeAfter
Commercial floor · Everett, WASolid Dark Grey Service Shop Floor in Everett1 of 12
Certified Penntek vs. typical epoxy or poly

Everett garage floors fail six ways. We beat all six.

The coating is only half of it. Watch the same slab go through what a Everett garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.

The right system for your concrete

Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.

Moisture & hardness tested
Typical epoxy or cheap polySame slab
✕Moisture pushes up from the slab. Blisters and peeling follow.
Certified Penntek by CascadeSame slab
✓Tested first. A moisture barrier goes down when the slab needs one.
Score after round 1Certified Penntek 1, typical epoxy or poly 0
The Penntek advantage

Not all coatings are equal. Watch.

Side-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.

Stain testOil, brake fluid and road grime wipe right off the non-porous Penntek topcoat, where typical epoxy can absorb stains.
Stretch testPenntek’s flexible basecoat stretches with the concrete. Brittle epoxy cracks and lets go.
Hammer testDropped tools are part of garage life. Typical coatings chip. Penntek resists chips and dents.
Watch the full side-by-side tests →

Settling for a quick epoxy job can leave your Everett garage peeling by year five.

A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.

✕Peeling where your tires sitSome installers skip diamond grinding, so the coating never truly grips your slab. Hot tires can lift it right off.
✕Yellowing by the garage doorMany epoxies amber in sunlight, so the first few feet of your floor turn a different color than the rest.
✕Cracks showing throughSome crews coat right over cracks. Every bit of slab movement shows up in your floor within a season or two.
✕Moisture blistersPuget Sound slabs hold moisture. Skip the testing and water vapor can push the coating up in bubbles.
✕Paying for it twiceTypical epoxy problems often show in years 3 to 5. Every redo means emptying your Everett garage and starting over.

We know your garage is more than a place to park. It's part of your home.

For a lot of Everett families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.

Nicole and Sheldon, owners of Cascade Concrete Coatings
The after

Picture pulling into a Everett garage you're proud of.

Here's what a Certified Penntek floor from our team gives you, long after install day.

✓Clean up in secondsThe non-porous topcoat shrugs off oil, salt and road grime, so a quick wipe keeps your garage looking finished.
✓Color that stays trueFadeLock UV stability keeps the floor by the open door matching the back wall, year after year.
✓A floor that moves with your slabThe flexible basecoat handles Northwest temperature swings and settling, so your Everett floor doesn't crack with the concrete.
✓Your garage back in a dayA typical garage is finished in one day. Before we leave, the crew gives you clear walk-on and parking times.
✓Coverage that outlasts any one shopYour limited lifetime warranty is backed by Penntek, the manufacturer, so it isn’t tied to one small company.
✓A garage that adds to your homeA finished, showroom-clean floor makes a strong first impression for guests, and for buyers when it’s time to sell.
Performance at every layer

Typical epoxy is one coat. Ours is a system.

Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.

01020304

When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.

Epoxy vs polyurea

Why Your Garage Deserves More Than a Standard Epoxy Coat

Standard epoxy grips the top of the concrete mechanically. It's rigid, so when the slab moves through a cold snap or a soggy month, the film cracks or lets go. It isn't UV stable, so the strip by the open door yellows first. And a car coming home hot off I-5 in August can pull soft epoxy right up with its tires.

Certified Penntek polyurea fixes those weak points with four things working together:

  • A proprietary pure polyurea blend. Over 99% solids, forming a 1,300+ PSI chemical bond with the concrete. Penntek calls it A Bond Stronger Than Concrete.
  • Prep by highly trained certified installers. Industrial diamond grinding opens the surface, and Penntek Mender fills cracks before any coating goes down.
  • A manufacturer-backed limited lifetime warranty. Penntek itself stands behind the floor, and Penntek is in 200+ markets.
  • A better product overall. FadeLock™ UV stability passed a 16-hour QUV test, and the polyaspartic topcoat resists hot tire pickup, oil, salt and chemicals.

The result is up to 5x the lifespan of typical epoxy and a 30 to 40 year floor. Two Everett auto shops chose it for bays that see more traffic in a week than a home garage sees in a year. Our post on whether Penntek polyurea resists hot tire pickup explains why.

01 / 04A proprietary pure polyurea blendPenntek's blend is over 99% solids and forms a 1,300+ PSI chemical bond with your concrete. It moves with the slab through wet and dry seasons instead of cracking like brittle epoxy.
02 / 04Certified installers who grind firstOur highly trained certified installers diamond grind every slab, repair cracks with Penntek Mender and test moisture before the first coat. Prep is where most failed floors around town went wrong.
03 / 04A warranty backed by the manufacturerYour floor carries a limited lifetime warranty backed by Penntek, with dealers in 200+ markets. That backing doesn't depend on any one installer staying in business.
04 / 04A better product, top to bottomFadeLock™ UV stability, a non-porous polyaspartic topcoat and up to 5x the lifespan of typical epoxy. It's the longest-lifespan concrete coating with the lowest lifetime cost of ownership.
Watch the side-by-side tests →How the Penntek warranty works →
Not your typical epoxy crew

Professionally trained installers

Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Certified Penntek Dealer

What "Certified Penntek Dealer" actually means

  1. 01Vetted before trainingPenntek reviews every company first. Many never make it to training.
  2. 02Hands-on training at PenntekChemistry, slab analysis, prep, application and troubleshooting, taught by Penntek’s technical team.
  3. 03Exclusive formulasPenntek’s proprietary polyurea is sold only to certified dealers. You can’t buy it at a store.
  4. 04Backed on every jobPenntek’s technical support team backs our crew from prep to finish, and Penntek backs your floor’s limited lifetime warranty.
What we coat in Everett

Any concrete, inside or out.

Garages are most of what we do in Everett, but the same Penntek system protects patios, pool decks, basements and commercial floors.

Garage floorsEpoxy poly garage floors for Everett homes, from one-car to four-car.Patios & walkwaysWeather-ready, slip-resistant coatings for outdoor concrete.Pool decksA good-looking, durable finish around the water.BasementsMoisture-tested coatings for finished and unfinished basements.Commercial floorsShops, showrooms and clinics in and around Everett.
Three steps

Your Path From Stained Slab to Finished Floor

No long project and no surprises. Here's how an Everett floor comes together.

  1. 01A free quote on a tested slabWe visit your home or shop, measure, test moisture and hardness, check every crack and lay color samples right on your concrete. You get a clear written quote.
  2. 02One install day for most garagesWe diamond grind, repair cracks, add a moisture barrier if your readings call for it, then lay the basecoat, flake and polyaspartic topcoat in one day.
  3. 03Park, work and forget the floorBefore we leave, you get walk-on and parking times. Then it's back to your car, your projects and a floor you won't need to redo.
Who you're talking to

What You Get When You Call a Certified Penntek Dealer

Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, and we drive north to Everett for garages, shops and commercial buildings. You know your floor better than anyone. You park on it every day. Our job is to hand you a concrete coating plan that ends the problem for good.

Most people who call us searched for an epoxy garage floor. That's the right search. What we install is Certified Penntek polyurea, which goes down in the same order as an epoxy job but behaves very differently once it's bonded to your slab. Some folks call it an epoxy poly floor, and that's fair shorthand.

Here's how we earn the job. We grind every slab with industrial diamond tooling. We test moisture and hardness before we quote. We repair cracks with Penntek Mender. And the finished floor carries a manufacturer-backed limited lifetime warranty, not a promise that only lasts as long as one crew does.

Want to see it before you call? Our installation process page walks through each stage, and the side-by-side epoxy and Penntek demo shows what happens when each one gets bent, scratched and pulled.

See the full install process →
Is it right for you?

Is a Penntek floor right for your Everett home?

You're probably a great fit if any of these sound familiar.

What Everett picked

Pick a Color That Fits How You Use the Space

Everett's choices split neatly in two. The shops went with solid greys that look clean and professional under bright lights. The homeowners went with flake blends that hide the grit of a wet Snohomish County winter. Compare the solid Light Grey in the big shop with the Tidal Wave flake in the hex-light garage and you'll see the range. We'll lay samples on your own concrete at the quote, or you can start with the full color and style library.

Light GreySolid ColorAutomotive Unlimited picked solid Light Grey for 3,000 square feet of service bays. It bounces shop light around and makes a workspace look clean and organized, which suits a home workshop or detail bay too.Dark GreySolid ColorThe performance shop chose Dark Grey to skip the flake look entirely. Solid dark grey hides tire marks and looks sharp next to lifts and tool chests, a good fit for a garage that doubles as a serious workspace.SmokeEvolution FlakeGrey, black and white flake that hides dirt and tire marks. It fits a busy two-car garage where wet tires roll in all winter, and it's what the six-day Everett project chose.Tidal WaveEvolution FlakeCascade's most installed color. The blue-gray, white and black flake finished the hex-light garage here and plays nicely with white cabinets, steel posts and modern lighting.
See every color and system →
Floors finished in town

Five Everett Floors You Can Look Up Today

Everett has handed us some of our hardest floors. Three of the five projects below are commercial, and two of those are auto service bays where hot tires, lift posts and fluid drips are an all-day thing. If a floor holds up there, it will hold up under your minivan.

Across these jobs the moisture meter read between 3.5% and 4.7% at the consult, and every reading shaped the plan before anyone touched a grinder. You can browse more work in our full project portfolio.

Smoke flake polyurea garage floor seen from the open door in Everett
Everett WaOct 2026Smoke Flake Two-Car Garage Floor in Everett
A standard two-car garage with unpainted drywall and one crack across the slab. Readings of 4.7% and 3.9% at the September 2024 consult, the crack repaired, then Smoke flake installed in a single day. Six days from first visit to finished floor. See the Smoke flake two-car garage.
See this project →
Reviews

Hear it from your neighbors.

All reviews →
Loading Google reviews…
Free in-home quote in Everett

Get the Everett garage floor everyone wishes they had.

An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.

Book my free quote425-226-6085
Around the city

Your Neighborhood, From the North End to Silver Lake

Everett's housing tells a long story. North Everett and the Riverside and Bayside neighborhoods hold older homes, many with narrow detached garages and slabs poured long before vapor barriers were standard. Those slabs can push moisture up from below, which is why we test before we quote.

South of downtown, around Silver Lake, Cascade View and the streets off Evergreen Way, you'll find split-levels, townhomes and two-car attached garages. Those slabs are often in better shape but still collect road film and oil from the daily commute. Near the waterfront and along the Snohomish River, damp air is part of life, and garages there stay wetter longer.

We put concrete coatings on commercial space here too. Auto shops, service bays and a brand new building all show up in our local work. If you run a business in town, read our guide to commercial vs residential garage floor coatings.

Next door, we also serve Marysville, Mukilteo, Lake Stevens and Mill Creek. For more on the city itself, the City of Everett website and Everett on Wikipedia are good places to start.

Nearby we also serve
MarysvilleMukilteoLake StevensMill CreekSnohomish
Two ways this goes

Cheap Kit or Lifetime Floor: What You'll Live With

Picture the kit route. You spend a weekend rolling epoxy over a slab that was acid-etched instead of ground. It looks great for a season. Then the first hot tires of summer lift a patch, the door strip starts to amber, and a few years in you're scraping flakes and starting over, with every box and bike hauled out again.

Now picture the other way. Your garage wipes clean after a January day of slush. Oil from the project car beads up instead of soaking in. The color by the door still matches the back corner years later. You stop thinking about the floor, which is the whole point.

Our post on why UV still matters on Puget Sound garage floors explains why the strip by your door is the first place a cheaper coating gives up.

Everett questions

What Everett homeowners ask us

Don't see yours? Call 425-226-6085 and an owner will answer it.

What affects the cost of a garage floor coating in Everett?+
The cost of a garage floor coating in Everett depends on the size of the space, crack and spall repair, whether the slab needs a moisture barrier, any old coating that has to come off, and extras like steps or curbs. The free in-home quote ends with an exact number for your floor, with no guesswork and no pressure to sign that day.
Do Everett garage slabs have moisture problems?+
Some Everett garage slabs carry more moisture than others, especially older ones in the north end and near the river. Our readings in town have run from 3.5% to 4.7% at consults. We test every slab, and when a reading calls for it we add a two-layer moisture barrier system before the basecoat goes down.
Can you coat my garage during an Everett winter?+
Yes, we install through the wet months in Everett. The crew checks slab moisture and temperature on install day and gives you walk-on and parking times before they leave. One of our local shop floors went down over New Year's week. Read more in can I coat my concrete floor in the winter.
How long does a Penntek floor last compared to epoxy?+
A Penntek floor is built to be a 30 to 40 year floor, with up to 5x the lifespan of typical epoxy. Many cheap epoxy jobs start peeling within a few years. The difference comes from the 1,300+ PSI chemical bond, over 99% solids and a UV-stable topcoat that holds its color by the door.
Is polyurea the same thing as epoxy?+
No, polyurea is not the same as epoxy, though it installs in similar steps. Epoxy is rigid and grips mechanically. Certified Penntek polyurea is a proprietary pure polyurea blend that bonds chemically, flexes with the slab and resists UV fade. People often call it epoxy polyurea, and we're fine with that.
Will an Everett garage floor handle hot tires, EVs and a workshop?+
Yes, a Penntek floor handles hot tires, heavy EVs and workshop abuse in an Everett garage. The polyaspartic topcoat resists hot tire pickup, oil, salt and chemicals. Two local auto shops run lifts, fluids and daily traffic on our floors, which is a harder test than most home garages will ever give it.
Which colors hide Everett road grit and winter mud?+
Flake blends like Smoke and Tidal Wave hide Everett road grit, mud and tire marks far better than solid colors. The mix of grey, black and white breaks up dirt between cleanings. If you prefer a solid look, Dark Grey hides more than Light Grey. See Smoke flake up close.
Do you serve my part of Everett?+
Yes, we serve all of Everett, from the north end, Riverside and Bayside to Lowell, Silver Lake and the neighborhoods off Evergreen Way. We also cover nearby Mukilteo, Mill Creek and Marysville. The free in-home quote comes to you, so where you live in the city doesn't change a thing.
Is it really a one-day install?+
Yes, a typical garage is a one-day installation. The Smoke flake garage in Everett went from first visit to finished floor in six days, and the install itself took one. Larger commercial spaces, like the 3,000 square foot auto shop, take several days and get planned around the business.
What warranty comes with the floor?+
Your floor comes with a limited lifetime warranty backed by Penntek, the manufacturer. That backing comes from a company in 200+ markets, not from a single local crew. We walk you through the written warranty terms at your free in-home quote so you know exactly what you're getting before you decide.
Does Cascade Concrete Coatings install epoxy garage floors in Everett?+

Yes. We install epoxy poly garage floors across Everett using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.

Do you coat patios, walkways and pool decks in Everett?+

We do. The same Penntek system that protects garages works on outdoor concrete around Everett, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.

Do you handle commercial concrete coatings in Everett?+

Yes. We coat shops, showrooms, clinics and service bays in and around Everett. See our commercial projects.

How do I get a quote for my Everett garage floor?+

Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.

A straight word

Why You Found This Page, and Why We're Glad You Did

Honest note. We wrote this page so people in Everett looking up epoxy garage floors and concrete coatings would find us. Search engines need those words. You need real answers. We tried to give you both, with floors from your own city as proof.

If you've read this far, thank you. If you live in a north end bungalow or run a shop off Evergreen Way, we'd be glad to stand on your slab and tell you what we see. Call 425-226-6085 or book your free in-home quote.

Nicole and Sheldon, owners

Ready to Finish Your Everett Garage Floor?

Call 425-226-6085 or book a free in-home quote. We'll test your slab, show you colors on your own concrete and give you a clear plan.

Get my free quote425-226-6085
All 30 cities we serveService area overview →
Ames LakeBellevueBothellCarnationDuvallEdmondsEverettIssaquahKenmoreKentKirklandLake Forest ParkLake StevensLynnwoodMarysvilleMedinaMercer IslandMill CreekMonroeMount VernonMukilteoNewcastleRedmondRentonSammamishSeattleShorelineSnohomishStanwoodWoodinville