Don't get stuck redoing your floor every few years. We'll test your Lake Stevens slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer, installs epoxy-style garage floor coatings in Lake Stevens using Certified Penntek polyurea. We grind off failed coatings, repair cracks, test moisture and finish a typical garage in one day. Our Lake Stevens work includes a garage gym in solid Medium Grey and an organized garage in Ash Enviroflake. Call 425-226-6085 for a free in-home quote.
Lots of Lake Stevens garages have a concrete coating story. Someone rolled on a kit the summer after move-in. It looked sharp for a while. Now it's peeling at the edges, lifting where the tires park and showing grey concrete through the gaps. Half coated, half bare, and harder to clean than plain concrete ever was.
Others never got that far. The builder left a bare slab with saw-cut joints, and it has been shedding dust and soaking up drips ever since. Every winter adds another layer of grime from wet roads and muddy boots.
Both garages end up in the same place, and neither one has to stay that way. You want a floor that looks finished, cleans up fast and stays put, and you don't want to do this twice.
Every Lake Stevens job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Lake Stevens garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Lake Stevens families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Most failed garage coatings around the lake fail for the same reasons. The slab was etched or just cleaned instead of ground. The epoxy was thin and brittle. Nobody checked moisture. When the concrete shifted or the first hot summer tires rolled in, the film let go.
A Certified Penntek floor fixes every one of those with four things you only get together:
That's how you get up to 5x the lifespan of typical epoxy. If your current floor is lifting, start with what to do about a peeling epoxy garage floor, then see why we don't just coat over it in can Penntek go over an existing epoxy floor.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Lake Stevens, but the same Penntek system protects patios, pool decks, basements and commercial floors.
Three steps, and you only have to make one phone call.
Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, and Lake Stevens is a regular stop for us. We've seen what a failed coating does to a slab, and we know how to get it back to clean, sound concrete before anything new goes down.
If you searched for an epoxy garage floor, you're in the right spot. We install Certified Penntek polyurea, which looks like what you pictured and goes down in a similar order. Around here people call it an epoxy poly floor. Under the hood, it's a different and much stronger material.
You don't need to scrape a thing before we arrive. Our crew handles removal, grinding and crack repair as part of the job. See how in the installation walkthrough, and read our honest take on DIY vs professional concrete coating installs.
You're probably a great fit if any of these sound familiar.
One local garage went solid. Medium Grey gave the gym and office a uniform, showroom gloss. The other went flake with Ash Enviroflake, light and clean against white cabinets. Solid looks like a finished room. Flake hides more dirt. Compare them all on the colors page.
The first one started rough. At the May 2025 visit, part of the floor still held an old dark coating that was peeling at the edges, and the rest was bare, pitted concrete. The crew ground every bit of it off, and the garage, now a gym and office, got glossy solid Medium Grey in September 2025. The outdoor concrete came later.
The second was in great shape and just needed finishing. Moisture read 4.1% and 4.0% in September 2025, and we checked level near the cabinets. That November it got bright Ash Enviroflake. We've added a couple of close neighbors below, and there's more in the full portfolio.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
Lake Stevens is built around its lake, the largest natural lake in Snohomish County. Homes near the water and around North Cove tend to be older, some with smaller garages and slabs that have been through a lot of wet winters. Up the hills and out along SR 9 and SR 204, newer subdivisions keep going in, with two and three-car garages and fresh concrete.
Both kinds of slab need care. Older ones may have no vapor barrier. Newer ones can still be giving off moisture from the pour. Lots near the lake and the low ground stay damp longer. Our readings in town have been steady, but we test every garage before we quote.
Lake life also means boats, paddleboards, wet wetsuits and sandy coolers rolling through the garage all summer, then muddy cleats and slush all winter. A non-porous floor makes that easy. Wipe it and you're done.
We're also close by in Snohomish, Marysville, Everett and Monroe. Learn more about town from the City of Lake Stevens or Lake Stevens on Wikipedia.
The risk with a redo is repeating the mistake. Another cheap coat on top of a failing one just peels faster. Another thin epoxy over an unground slab buys you a couple of years, then you're emptying the garage again and paying a third time.
The win looks different. Your garage floor is solid edge to edge, bonded into clean concrete. The gym mats sit flat. The tools on the wall hang over a floor that wipes clean in seconds. The color by the door matches the back wall. It's a 30 to 40 year floor, and you're done thinking about it.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Lake Stevens using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Lake Stevens, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Lake Stevens. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
Plain truth. We wrote this page so people in Lake Stevens searching for epoxy garage floors and concrete coatings would find us. If that's how you got here, welcome. We tried to make it worth the click with real local floors and straight answers.
If your garage has a coating that's coming apart, or a builder slab you're tired of sweeping, give us a call at 425-226-6085 or set up a free in-home quote. We'll tell you exactly what we see.
Call 425-226-6085 or book your free in-home quote. We'll test your slab, look at any old coating and give you a straight plan.