Don't get stuck redoing your floor every few years. We'll test your Bothell slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer based about two miles away in Woodinville, installs epoxy-style garage floor coatings in Bothell. Every job starts with moisture and hardness testing, then diamond grinding, crack repair and a pure polyurea basecoat with flake and a polyaspartic topcoat. Six Bothell projects are on the portfolio, including garages, a carport and walkways, all backed by a limited lifetime warranty from Penntek.
Bothell sits low along the Sammamish River and climbs north toward Canyon Park and North Creek. That means a lot of concrete that spends half the year damp. A slab poured in a low spot, or before vapor barriers were common, can push water up from below all winter.
You see it in small ways first. Dark patches near the door. White dust that never sweeps clean. Green streaks on a patio where water sits. Then a coating on top starts to blister or peel at the tire lines.
Winter driving adds its own load. Cars come home from I-405 and SR 522 carrying slush, grit and deicer, and bare concrete soaks up every drip. The slab is not the enemy. It just needs a coating that is bonded to it, not sitting on top of it.
Every Bothell job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Bothell garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Bothell families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Typical epoxy is brittle. It grips the top of the slab mechanically, cracks when the concrete moves and tends to yellow where sun comes through the door. On a slab that reads over 5% in January, that kind of grip has a short life. It is why so many people now ask us for epoxy poly instead.
What sets a Certified Penntek floor apart is a combination, and you need all four parts:
When a slab reads high, we add Penntek's two-layer moisture barrier system before the color coats. That is how a damp slab here still ends up with a floor built for 30 to 40 years, up to 5x the lifespan of typical epoxy. Watch the bond and flex tests on our side-by-side demo.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Bothell, but the same Penntek system protects patios, pool decks, basements and commercial floors.
One short visit, one install day and you are parking again. Some homeowners here go from test to finished floor in a week. Every stage is laid out on our installation page.
We are Cascade Concrete Coatings, a Certified Penntek Dealer based just upriver in Woodinville. This is one of the places we work most, and our owners are at every consult and every install.
Here is what we bring to your garage. A moisture meter, because damp slabs ruin coatings in this region more than anything else. A hardness pick for a scratch test, because hardness tells us how hard to grind. And the patience to slow down when the numbers say so.
Plenty of homeowners here ask us for epoxy poly garage floors. That is a fine place to start. The floor we install is Certified Penntek polyurea, applied with a similar process, and our job is to fit it to your slab, not the other way around.
You're probably a great fit if any of these sound familiar.
Around town, Mount Everest leads so far, on a garage and the cracked carport. Smoke and Tidal Wave follow, and two owners chose Wild Dove and Stoney Creek for a warmer look.
If your garage sees a lot of wet tires, a mid-tone flake hides grit between mops. If you want the room to feel bigger, go lighter. We bring sample boards so you can decide in your own garage light, and you can preview everything on our colors page.
This city gives us more than garages, and more than one kind of concrete coating job. Our six local projects include a carport open to the rain, a home where every walkway and patio now matches and a January garage that tested damp enough to change the whole plan.
Two more show the simple side of the work. A packed single bay at about 320 square feet got Stoney Creek flake with the shelves left in place under plastic in October 2025. And an empty two-car garage went from moisture test to finished Mount Everest floor in one week in August 2024.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
Bothell is one city in two counties, and the garages change as you cross it. Near downtown Main Street and the river, older homes often have single bays and carports on slabs that have seen decades of rain. Up the hill toward Canyon Park, North Creek and Thrasher's Corner, you find two-car and three-car garages with built-in cabinets and stem walls. Out by the UW Bothell and Cascadia campus, newer builds bring fresh concrete that still needs a careful moisture reading.
We put down concrete coatings on all of it, on both sides of the King and Snohomish county line. If you live near the edge of town, our crew is just as close to you there. We work in Woodinville upriver, Kenmore where the river meets the lake, Kirkland to the south and Lynnwood to the northwest.
For permit questions on a garage build or remodel, start with the City of Bothell. The Bothell article on Wikipedia covers how the city grew along the river.
A kit or low bid often skips the meter and the grinder. The coating looks great for a while. Then a damp winter pushes moisture up, it bubbles and lets go, and you are hauling bikes and bins onto the driveway in the rain to start over. You pay to grind off the failure and pay again for a new floor. Our post on the installation mistakes we fix in Bothell and Woodinville shows how it happens.
The better outcome is simple. Slush and road grit wipe off a glossy flake floor in minutes. The carport stays clean after a sideways rain. The patio no longer grows green streaks. And when you sell, the garage is a room you are proud to show.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Bothell using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Bothell, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Bothell. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
Straight up: we wrote this page so people in Bothell searching for epoxy garage floors or concrete coatings would find us. We are glad you did, and we hope the real readings and real floors were more useful than a sales pitch.
If your slab is damp, cracked or already peeling, that is the kind of floor we like solving. Call 425-226-6085 or book a free in-home quote, and we will bring the meter.
Book a free in-home quote and we will meter your concrete, check every crack and show you real color samples. Call 425-226-6085 to get on the schedule.