Don't get stuck redoing your floor every few years. We'll test your Renton slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings installs epoxy-style garage floor coatings in Renton as a Certified Penntek Dealer, using Penntek polyurea, which outlasts epoxy. Our closest finished garage sits next door in Tukwila. At a free in-home quote we meter your slab for moisture and scratch test its hardness. Most garages are ground and coated in a single day. Reach us at 425-226-6085.
This city has two personalities. Down on the valley floor along the Cedar River and the south end of Lake Washington, slabs sit close to the water table. Up on the hills in the Highlands, Kennydale, Benson Hill, Talbot Hill and Fairwood, garages get rain running down driveways and tracked-in grit from I-405, SR 167 and the Maple Valley Highway.
Either way, bare concrete drinks it in. Oil stains spread. Road grime turns the floor a dull grey. A do-it-yourself epoxy kit peels in patches where the tires sit, because it never bonded to the slab in the first place.
And many garages around here have a remodel story. The garage becomes the job site, the saws and trim live on the slab for months, and the floor gets saved for last. That is the right instinct. It just means the floor you choose has to hold up for decades after the dust settles.
Every Renton job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Renton garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Renton families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Homeowners here usually search for epoxy flooring or concrete coatings, and the install day looks a lot like an epoxy job. That is why we use the term epoxy poly garage floors. The material, though, is Certified Penntek polyurea, and four pieces working together make it a different floor.
For a valley-floor slab close to the water table, the bond and the moisture plan carry the day. When a reading runs high, we put down a two-layer moisture barrier system before the basecoat. You can watch the bond and stretch tests on the epoxy vs Penntek demo.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Renton, but the same Penntek system protects patios, pool decks, basements and commercial floors.
If you are mid-remodel, call us early. We can test the slab now and schedule the floor after the drywall and paint, so it comes out clean. Here is how it works.
We will be straight with you. Cascade Concrete Coatings has not finished a floor inside Renton city limits yet. The city sits about 19 miles from our home base in Woodinville, near the south edge of where we work. Our closest garage is right next door in Tukwila, and each project below carries the name of the town it is actually in.
What we bring is a Certified Penntek process that does not change from town to town. That Tukwila garage is a good example. It was mid-remodel, so we tested more than once. The meter read 4.7% and 5.2% in January and 6.1% in another spot when we came back in February. Remodels change a slab, and we would rather catch that early than guess.
Our post on why moisture testing matters in this rainy climate explains what those numbers mean.
You're probably a great fit if any of these sound familiar.
Road film from the freeways and wet grit from the hills both show up as grey streaks on a garage floor. Flake blends with a mix of grey, black and white hide that well. Smoke leads near you, and it pairs well with the wainscot look the Tukwila homeowner chose.
If your garage is dark or deep, a lighter blend like Mount Everest opens it up. Our styles and colors guide shows every option across all four systems.
These come from Tukwila, Bellevue and Edgewood. Two of them are garages that were finished last, after a remodel, which is how a lot of local homeowners plan the job. One is a brand new build where grinding uncovered a web of hidden cracks.
Smoke shows up twice, and it is the most chosen color among our projects near you. When the first Renton floor is done, it goes right at the top. Until then, the whole finished project portfolio is open to browse.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
We serve all of Renton. Kennydale and the homes above the lake, the Highlands, Talbot Hill, Benson Hill and Fairwood to the south and east, and the older neighborhoods near downtown and the Cedar River. You will find everything here, from mid-century single-car garages to newer two and three car garages in the hillside developments.
Renton has deep roots in coal mining and aircraft building, and the Boeing plant on the lakeshore still turns out jetliners. The Renton article on Wikipedia tells that story, and the City of Renton website covers permits for other projects.
We also install concrete coatings in Newcastle, Kent, Issaquah and Mercer Island.
A bargain kit looks great the first summer. By year three, hot tires have lifted it where you park, water has crept under the edges and road grime has stained whatever is left. You pay to clear the garage, grind it off and start over. Our post on the hidden cost of cheap garage floor coatings over five years runs through it.
The other path is a floor you forget about. Spills sit on top of the topcoat until you wipe them. Rainwater off the car goes out the door with one pass of a squeegee. The remodel you worked so hard on finally has a garage that matches. In Penntek's words, this is the longest-lifespan concrete coating with the lowest lifetime cost of ownership. They rate the system as a 30 to 40 year floor.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Renton using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Renton, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Renton. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
Here is the honest truth. This page exists so that when someone in Renton types epoxy garage floors or concrete coatings into Google, they land on a Certified Penntek crew willing to tell them the truth, including that our first Renton floor is still ahead. We are glad you found it.
When you are ready, schedule a free in-home quote. We bring the meter, the samples and an honest answer about your slab.
Call 425-226-6085 or reach out online. A free in-home quote starts with a moisture meter on your concrete, then flake samples.