Don't get stuck redoing your floor every few years. We'll test your Shoreline slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer based in Woodinville, installs epoxy-style garage floor coatings in Shoreline. We use Certified Penntek polyurea instead of epoxy. Diamond grinding and Mender crack repair come first, then a pure polyurea basecoat over 99% solids, flake and a polyaspartic topcoat. Most Shoreline garages are done in one day after a free in-home quote with moisture and hardness testing.
Walk into enough Shoreline garages and you start to see three kinds of floor. The first is the old slab under a post-war rambler, with rust blooms, oil spots and decades of gray grime. The second is the remodel, where new drywall and windows make the cracked concrete look worse than ever. The third is the brand-new home, where the slab is already covered in mud, paint drips and boot prints before anyone moves in.
Each one tempts people toward a quick epoxy garage floor. And each one punishes it. Rust and oil keep a thin film from gripping. Cracks telegraph straight through rigid epoxy. Fresh concrete can still carry moisture, and our four readings on one new Shoreline slab ran from 5.0% to 5.6%. Skip the test and the coating can blister from below.
None of those floors is a lost cause. They just need a concrete coating installed by people who start with the slab, not the color chart.
Every Shoreline job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Shoreline garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Shoreline families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Most people here search for epoxy, and many neighbors call our floors epoxy poly garage floors because the install looks familiar. Underneath, it is a different system. Penntek's difference comes from four things together.
First, a proprietary pure polyurea blend that only certified dealers install. Second, prep by highly trained certified installers, including diamond grinding and Mender crack repair, which is what pulled the rust stains out of that single-bay garage. Third, a limited lifetime warranty backed by Penntek itself. Fourth, a better product overall, built as a 30 to 40 year floor with up to 5x the lifespan of typical epoxy.
The numbers behind it are simple. Over 99% solids. A chemical bond over 1,300 PSI. A non-porous polyaspartic topcoat that shrugs off hot tire pickup, oil and salt, and FadeLock™ UV stability proven in a 16-hour QUV test. Read what Penntek polyurea actually is, or watch the bond and flex tests in the side-by-side Penntek demo.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Shoreline, but the same Penntek system protects patios, pool decks, basements and commercial floors.
Three steps, no surprises. If you want to see the hour-by-hour flow, our install process page walks through it.
Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, a quick trip down SR 522 and across to your side of north King County. We are not a paint crew with a roller. Our certified installers grind with industrial diamond tooling, repair cracks with Penntek Mender and log the slab readings on every job.
That starts at your free in-home quote. We put a moisture meter on the concrete in more than one spot and scratch test the surface for hardness. In Shoreline our readings have landed anywhere from 2.7% to 5.6%, which is exactly why we never guess. If your slab needs a two-layer moisture barrier system, you hear it from us before install day.
Garages are most of our work here, but the same concrete coatings go on porches, covered walkways and basement floors. If you have more than one slab that needs attention, we can test them all on the same visit.
You're probably a great fit if any of these sound familiar.
Shoreline owners lean toward calm, light-to-mid grays. Two garages here went with Ash, and two used Slate Stone, one of them blended with Silver Creek. Those tones hide the gray grit that rides in on tires from Aurora and I-5 without making the room feel dark. Browse the whole range on styles and colors.
Here is the honest list. Four Shoreline garage floors and one covered walkway just north in Mountlake Terrace. Between them you get a winter install, a remodel finish, a new build and a hillside garage where the concrete walls got coated too.
The pattern is the same on every one. Test, grind, repair, coat. What changes is the slab, and each project tour shows the readings we took. You can see more of our work across the region in the project portfolio.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
Shoreline sits right between Seattle and the Snohomish County line, and we cover all of it. On the west side that means Richmond Beach, Innis Arden and The Highlands, where homes step down toward Puget Sound and garages often sit in the hillside with thick concrete foundation walls. In the middle, Echo Lake, Meridian Park, Parkwood and the neighborhoods along Aurora Avenue. To the east, Ridgecrest, North City, Ballinger, Briarcrest and the streets around Hamlin Park.
A lot of the housing is post-war ramblers and split-levels with attached one- and two-car garages. Since the two Link light rail stations opened in 2024, new townhomes and homes keep going up near them, and those fresh slabs need protecting before life fills the garage. The City of Shoreline handles permits if your floor is part of a larger remodel. You can read more about the city on Wikipedia.
Just over the borders, we also coat floors in Lake Forest Park, Edmonds, Lynnwood, Seattle and Kenmore.
Picture the remodel garage with new drywall and windows, finished with a store-bought epoxy kit. Within a few winters the cracks show through, the film lifts where tires turn and the spot by the door yellows. Now you are moving everything out again to have it ground off. Our post on DIY versus professional concrete coating installation explains why.
Now picture it the other way. Cracks filled with Mender, a flexible polyurea basecoat bonded to clean concrete and a topcoat that wipes clean. The floor matches the walls for decades. You did the job once.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Shoreline using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Shoreline, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Shoreline. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
We wrote this page so people in Shoreline searching for epoxy garage floors and concrete coatings would find us. That is the plain truth. We also wanted it to be worth your time, so every reading and project above came from real garages in your town.
If yours has rust stains, remodel cracks or a brand-new slab, we would be glad to take a look. Call 425-226-6085.
Book a free in-home quote and we will test your slab, measure the space and show you flake samples in your own garage light. Call 425-226-6085.