Don't get stuck redoing your floor every few years. We'll test your Sammamish slab, prep it right and install a Certified Penntek polyurea floor that bonds with your concrete, so you can stop worrying about the garage and start enjoying it.
Cascade Concrete Coatings, a Certified Penntek Dealer based in Woodinville, installs epoxy-style garage floor coatings in Sammamish using Penntek polyurea instead of epoxy. Every plateau slab gets moisture and hardness testing at a free in-home quote. A typical garage is ground, repaired and coated in one day, and the floor carries a limited lifetime warranty backed by Penntek. Call 425-226-6085.
Sammamish sits up on the plateau east of Lake Sammamish. The city incorporated in 1999, and many homes here are newer builds with big attached garages, two and three bays wide, built on slabs that look tidy on move-in day and then slowly collect the story of your life.
Fir needles ride in on the tires every time the door opens. Rain drips off the car and sits in the low spots. Dark tire tracks press into bare concrete until no pressure washer will lift them. We saw exactly that in an 838 square foot garage here, where years of parking had left the slab looking tired from the door to the back wall.
Then there is what you can't see. Newer does not mean dry. Our meter readings on Sammamish slabs have run from 4.0% to 6.3%, and long wet seasons keep vapor moving up through the concrete. A thin store-bought coating rolled over that kind of slab is the floor that starts lifting right where you park.
Every Sammamish job starts with a moisture and hardness test, then industrial diamond grinding, crack repair with Penntek Mender and a pure polyurea basecoat with a FadeLock UV topcoat. That's how we deliver up to 5x the lifespan of typical epoxy, a 30 to 40 year floor, with a limited lifetime warranty backed by Penntek.
Drag the handle to compare. Every pair is a real floor our team ground, repaired and coated.
The coating is only half of it. Watch the same slab go through what a Sammamish garage puts it through, once with typical epoxy or cheap poly and once the way we install Penntek.
Your slab’s age, composition and moisture all matter. We test it first, then choose the Penntek system that fits, adding a moisture barrier when the readings call for it.
Moisture & hardness testedSide-by-side tests on the same slab, in the same conditions. Typical epoxy and cheap poly on one side, certified Penntek on the other.
A floor that fails doesn't just look bad. It means emptying the garage, grinding off the old coating and paying all over again.
For a lot of Sammamish families it's the gym, the workshop, the mudroom and the first thing you see when you get home. You've put real money into it. You deserve a floor you never have to think about again, installed by people who treat your home like their own.
Nicole and Sheldon, owners of Cascade Concrete CoatingsHere's what a Certified Penntek floor from our team gives you, long after install day.
Every certified Penntek floor is built in four layers, each doing its own job. Watch it go down layer by layer, then tap a layer to see what it does for your floor.
When moisture readings call for it, we add a two-layer moisture barrier system before the basecoat.
Most people on the plateau start their search for concrete coatings with “epoxy garage floor.” That is fair. The install looks a lot like an epoxy job, and you will hear us call the result an epoxy poly garage floor. What goes down is Certified Penntek polyurea, and it behaves differently from the epoxy you can buy in a kit.
The Penntek difference comes from four things working together:
That bond is where the tagline comes from: A Bond Stronger Than Concrete. On a damp plateau slab, a coating that holds on chemically is the one still attached in 2040. You can watch the adhesion and flex tests on our side-by-side epoxy vs Penntek demo, or read how long a Penntek floor lasts.
Anyone can buy a kit and call themselves a garage floor company. Penntek doesn't sell to just anyone. Our team was vetted, trained hands-on through Penntek Academy and is backed by Penntek's full-time technical support team from prep to finish. That's the Penntek Standard, on every floor we install.

Garages are most of what we do in Sammamish, but the same Penntek system protects patios, pool decks, basements and commercial floors.
No pressure, no guesswork. We come to your garage, test the slab and leave a written quote. If you go ahead, a typical Sammamish garage is ground, repaired and coated in one day.
Cascade Concrete Coatings is a Certified Penntek Dealer based in Woodinville, about 11 miles from the plateau. We have finished five projects in Sammamish, and every one started the same way: a moisture meter on the bare concrete before anyone talked about color.
On one April 2026 job we took five readings across a single garage, from the open middle to the edge by the wall. They ran from 4.8% to 5.5%. Concrete is not uniform, and the spot near the door often tells a different story than the center. We also scratch test the surface so the crew knows how hard the slab is before the grinder ever arrives.
That reading decides the plan. If your slab needs our two-layer moisture barrier system, you hear it at the quote, not after a failure. You can see how the day unfolds on our installation process page.
You're probably a great fit if any of these sound familiar.
On the plateau, a garage floor color has two jobs. It has to look good next to dark siding and stone veneer, and it has to hide the dusting of needles and grit that blows in every time the door rolls up. Mid-tone flake blends do both.
Tidal Wave leads here for a reason. Blue Granite came from our entry walk job, where the homeowner wanted the concrete to match the house. If you prefer clean and bright, one Sammamish family chose a solid light grey with no flake at all. Our full styles and colors library shows every option in the Evolution Flake, Enviroflake, Hybrid Terrazzo Flake and Solid Color systems.
Here is the real work, not stock photos. Four garages and one front entry walk, each with its moisture numbers, square footage and color recorded for the Penntek warranty. Two of the garages went down in Tidal Wave, which is also Cascade's most installed color.
One of them is worth a closer look if you are worried about timing. Our crew ground and coated a 739 square foot garage on a cold November day at 50°F and took the last photos under the lights after dark. You can browse more finished floors from around the Eastside in the full project portfolio.
An owner comes out, tests your slab, brings real color samples and writes a clear quote. No pressure, just a plan for a floor you'll only buy once.
We work all over Sammamish. Klahanie, Pine Lake, Beaver Lake, the Sahalee and Trossachs areas, the neighborhoods off Issaquah-Pine Lake Road and the homes that step down toward East Lake Sammamish Parkway. Most of what we see up here are newer two and three car garages with steps up to the house, knee walls, support posts and plenty of storage.
Those details matter. On the Slate Stone job we coated four stairs and 30 feet of wall base along with the floor. On the April Tidal Wave garage, the steps and knee wall got the same finish so the room reads as one surface. And not every project is a garage. The Blue Granite entry walk covered a front landing and side path that stayed shady and green under a street tree.
New to town? The City of Sammamish site covers permits and services, and the Sammamish history on Wikipedia is a good read. We also install concrete coatings in nearby Issaquah, Redmond, Ames Lake and Newcastle.
Picture the cheap kit first. It goes down on an acid-etched slab with no moisture reading. By year three or four, the coating flakes where your tires sit, the color yellows near the door and the oil spots soak through. Now you have to empty the garage, grind the old layer off and pay for a second floor.
Now picture the other garage, finished with an epoxy polyurea system done right. You pull in after a wet week, squeegee the puddle out the door and the floor looks the way it did on install day. Needles sweep up. Oil wipes off the non-porous polyaspartic topcoat. Penntek calls this the longest-lifespan concrete coating with the lowest lifetime cost of ownership, a 30 to 40 year floor you choose one time.
If you have an older floor already peeling, we can talk through whether Penntek can go over existing epoxy at your quote.
Don't see yours? Call 425-226-6085 and an owner will answer it.
Yes. We install epoxy poly garage floors across Sammamish using Certified Penntek polyurea instead of epoxy. It looks like a premium flake floor and offers up to 5x the lifespan of typical epoxy. See all our services or book a free in-home quote.
We do. The same Penntek system that protects garages works on outdoor concrete around Sammamish, with a slip-resistant finish and FadeLock UV stability. See patio and walkway projects.
Yes. We coat shops, showrooms, clinics and service bays in and around Sammamish. See our commercial projects.
Call 425-226-6085 or request a free in-home quote. An owner visits, tests your slab and brings color samples. We don't quote over the phone because every slab is different.
We wrote this page so people in Sammamish typing epoxy garage floors or concrete coatings into a search bar would find a local crew that has actually worked on the plateau. If that is how you landed here, welcome. We are glad you are here.
We would rather earn your trust with real numbers from real Sammamish slabs than with big promises. When you are ready, book your free in-home quote and we will bring the moisture meter.
Book a free in-home quote and we will test your Sammamish garage for moisture and hardness before we talk colors. Call 425-226-6085 or reach us online.