Certified Penntek dealer / Woodinville, WAServing Seattle & the EastsideLimited lifetime warranty
Cascade Concrete Coatings
425-226-6085Get a free quote
Garage floor coating · Redmond, WA

Redmond Tandem Garage Coated in Slate Stone in a Single Day

A deep Redmond tandem garage went from bare concrete to Slate Stone flake polyurea between lunch and dinner, after a moisture test at the consult.

Get a free in-home quoteSee all 10 photos
Long tandem garage in Redmond finished in Slate Stone flake polyurea
CityRedmond, WA
Color
Slate Stone
SystemEvolution Flake
Project typeGarage Floor Coating
InstalledOct 2026

Before & after

↔BeforeAfter

Some garages are wide. This one is deep. The Redmond home had a long tandem bay that runs well past the first car, with white walls, a door into the house and a lot of open concrete. The slab was in decent shape, but it was bare, dusty and already picking up marks. The homeowner wanted a garage floor coating in Redmond that would look finished from the door to the back wall and stay easy to clean for decades.

In November 2024 Cascade's crew covered the whole length in Certified Penntek polyurea with Slate Stone flake. The photos tell the timeline. Bare ground concrete just before 1 p.m. Basecoat and flake by late afternoon. A glossy finished floor by about 6 p.m. One day.

Why coat a slab that looks fine?

A newer garage slab often looks clean for the first few years. Then the oil drips, road salt and tire marks start soaking in, because bare concrete is porous. Coating a slab while it is still sound is the easiest time to do it. There are fewer stains to grind out and fewer repairs to make.

At the free consultation in October 2024 we tested hardness with a scratch test and took a moisture reading. The meter read 5.4%. We test every slab before we quote it, because moisture is the main reason floor coatings let go in the Northwest. Our post on why moisture testing matters in a rainy climate covers what we look for.

How a deep garage gets coated in one day

A tandem garage is mostly a logistics problem. Every step has to reach the back wall and work its way out the door without anyone stepping on wet coating. Sheldon's crew ran it like this:

  1. Industrial diamond grind from the back wall forward, edges included.
  2. Vacuum the dust out of the whole bay.
  3. Roll the pure polyurea basecoat, over 99% solids with no fillers.
  4. Broadcast Slate Stone flake to full coverage while the basecoat is wet.
  5. Scrape and collect the loose flake.
  6. Seal it all with a polyaspartic topcoat that carries FadeLock™ UV stability.

The basecoat bonds chemically with the ground concrete, helped by a silane adhesion promoter. Bond strength tests at over 1,300 PSI. Before the coating comes up, the concrete will come up.

Slate Stone in a long white room

Slate Stone Evolution is a mix of charcoal, grey and white chips. In a long garage with white walls it keeps the space bright without looking stark. The mid tone hides the everyday stuff too. Dust, wet footprints and a bit of road grit fade into the pattern until you get to them with a broom.

The polyaspartic topcoat is non-porous, so oil, salt and grease sit on top instead of soaking in. It also resists hot tire pickup, which is when warm tires lift a weaker coating off the floor.

What makes it a 30–40 year floor

Typical epoxy is rigid. When the slab moves through seasons it can crack or lift, and problems often show up in years 3–5. Penntek's basecoat is flexible and moves with the concrete. You can watch it in the Penntek Stretch Test. People often call this kind of floor an epoxy poly garage floor, and the look is similar. What sets a Penntek floor apart is the mix of Penntek's proprietary polyurea formulas, careful prep from highly trained Certified Penntek installers, a manufacturer-backed limited lifetime warranty and a stronger product from the basecoat up.

The color holds up as well. FadeLock™ in the topcoat passed a 16-hour QUV accelerated UV test, so it won't yellow or amber near the open door. The floor carries a limited lifetime warranty backed by Penntek, the manufacturer, and registered on the job.

Garage floors in Redmond

Redmond sits in the Sammamish River valley, and the wet season runs long. Cars come in dripping from October through spring, and that water carries grit and road film onto the floor every day. A sealed floor turns that into a quick squeegee job instead of a permanent stain.

See more of our garage floor coatings in Redmond, or compare this one with a Redmond garage remodel finished in Domino flake.

Tandem garage questions

Is it worth coating a garage floor that is still in good shape?

Yes, and it is often the best time. A sound slab needs less repair, and coating it before stains set in keeps the concrete protected from the start. A Certified Penntek polyurea floor is built to last 30–40 years.

How do you coat a long tandem garage without walking on wet coating?

The crew starts every step at the back wall and works toward the door. Grinding, basecoat, flake and topcoat all follow the same path, so nobody has to cross fresh coating.

Will Slate Stone show tire marks?

Slate Stone is a mid tone blend, so it hides everyday dirt better than a very light or very dark floor. The polyaspartic topcoat resists hot tire pickup, and most marks wipe off with a mop.

Want to see Slate Stone and other chips on your own slab? Book a free in-home quote or call 425-226-6085. Nicole and Sheldon own Cascade and will walk you through the options.

Project photos

10 photos · tap to enlarge

More floors in Redmond

All Redmond projects →
Close view of black, grey and white Domino flake on a Redmond garage floorRedmondGarageDomino Flake Garage Remodel Floor in RedmondLow view of light grey Ash Enviroflake chips on a Redmond garage floorRedmondGarageAsh Enviroflake Garage and Entry Step in RedmondGlossy Pebble Beach flake floor between support posts in a Redmond garageRedmondGaragePebble Beach Flake Garage Floor in Redmond

More floors in Slate Stone

About Slate Stone →
Slate Stone flake garage floor in an Edmonds family garage with golf bags and shoe racksEdmondsGarageSlate Stone Family Garage Floor in EdmondsClose view of charcoal, gray and white Slate Stone flake on a garage floorWoodinvilleGarageSlate Stone Garage and Mechanical Room in WoodinvilleSlate Stone flake polyurea garage floor with plywood walls in a Kirkland homeKirklandGarageSlate Stone Flake Garage Floor in Kirkland

Your floor could be next.

An owner visits, tests your slab and writes your quote. Certified Penntek polyurea with a limited lifetime warranty backed by Penntek.

Book my free quote425-226-6085